Hi Folks
Peter ask me to say a little bit about my Paradise Preregulator box.
First of all , the PSU works very well and sounds much much better as my
previous simple PSU.😀
To the structure, you wil see it all on the photos.
Matreial:
The box is 2mm normal steel ( ST 37,2),
The middel and front plate is in 12 mm Aluminium,
Underneath the boards you see 16mm medium-density-fiberboard (MDF),
On top of the MDF plates 1mm cooper tubs.
http://origin.dastatic.com/forums/gallery/data/500/CIMG4787.JPG
http://origin.dastatic.com/forums/gallery/data/500/CIMG4789.JPG
http://origin.dastatic.com/forums/gallery/data/500/CIMG4792.JPG
I know that finish could be better, noboddy is perfect. 😉
Take it easy
Werner
Peter ask me to say a little bit about my Paradise Preregulator box.
First of all , the PSU works very well and sounds much much better as my
previous simple PSU.😀
To the structure, you wil see it all on the photos.
Matreial:
The box is 2mm normal steel ( ST 37,2),
The middel and front plate is in 12 mm Aluminium,
Underneath the boards you see 16mm medium-density-fiberboard (MDF),
On top of the MDF plates 1mm cooper tubs.
http://origin.dastatic.com/forums/gallery/data/500/CIMG4787.JPG
http://origin.dastatic.com/forums/gallery/data/500/CIMG4789.JPG
http://origin.dastatic.com/forums/gallery/data/500/CIMG4792.JPG
I know that finish could be better, noboddy is perfect. 😉
Take it easy
Werner
There should be some more out there.
Our friends in the USofA will receive soon.
Shipment is on it's way to Wiesbaden, to be
handed over to Frankfurt Airport.
Our friends in the USofA will receive soon.
Shipment is on it's way to Wiesbaden, to be
handed over to Frankfurt Airport.
Yeah, I forgot them, but don't worry, they will go in 😀
Yesterday I ordered all the Paradise components at Mouser, just the Resistors, that I ordered at Hificollective, because of the nonmagnetic resistors...
Hi Benedetto,
Has my package been shipped yet ? The order is for two stereo sets (PCB+Parts+Risers) minus Hammond transformers. Shipping is to Canada.
Thanks...
Has my package been shipped yet ? The order is for two stereo sets (PCB+Parts+Risers) minus Hammond transformers. Shipping is to Canada.
Thanks...
I often had issues (noise) just by using this type of connectors between the psu and the phono preamps I have built.
I still use them (but in the screw version) and found that hard tightening can minimize the problem.... sometimes I must use soldering to overcome the problems.
Please let us know your opinion.
Hello Ricardo,
what kind of Noise issues are you talking of ?
Until now, no one of the builders, including me,
experienced anything like that.
And it is very unlikely because this is a profi
solution used by millions @ industry....
what kind of Noise issues are you talking of ?
Until now, no one of the builders, including me,
experienced anything like that.
And it is very unlikely because this is a profi
solution used by millions @ industry....
Hi Peter,
Do you know when are you going to ship my phono and preregulators?
Regards,
TonyB
Do you know when are you going to ship my phono and preregulators?
Regards,
TonyB
Never mind... but I experienced (unfortunately many times) noise problems due to the connections between the shunts and the riaa boards... not exactly what you have here so maybe there is no reason for my question.
Hi
it had taken along time with no information about shipping to US - also regular emails asking for info does not get any response. I feel Benedetto should give quick ansers to all those waiting after many months
I had been waiting and no reply to email sent to Benedetto?
can I get an update on my kit complete
thanks
kannan
it had taken along time with no information about shipping to US - also regular emails asking for info does not get any response. I feel Benedetto should give quick ansers to all those waiting after many months
I had been waiting and no reply to email sent to Benedetto?
can I get an update on my kit complete
thanks
kannan
- Status
- Not open for further replies.