Go Back   Home > Forums > Blogs

Old

Build your own case

Posted 20th November 2009 at 09:52 PM by DougL

https://www.diyaudio.com/forums/const...ml#post1987690

These are answers I need.

Thanks.
diyAudio Member
Views 732 Comments 0 DougL is offline
Old

Tube Voltage Regulator, Is it worth the effort

Posted 27th October 2009 at 10:31 PM by DougL
Updated 13th January 2010 at 09:53 PM by DougL

This thread has some good, solid information and very little bravado.

https://www.diyaudio.com/forums/tubes...th-effort.html

Special Mention to:
janneman
Tubelab
kevinkr
Allen Wright
Bas Horneman
SY

For their interesting contributions.

IMHO, There are several ways to make an adequate Power supply. And several ways to totally botch the job.

In the 1980's, I was totally against using solid state in a tube preamp. However, this was more about not using low voltage devices in high voltage circuits than anything else.
Now that high voltage transistors are available this is not a major consideration.
My first tube amp is going to be a platform to play with some of the discussions.
I want to try unregulated and regulated power supplies. I will probably start out with unregulated choke input supplies.

It...
diyAudio Member
Views 1098 Comments 2 DougL is offline
Old

Beast with a Thousand JFETs

Posted 28th September 2009 at 06:17 PM by DougL

Quote:
Originally Posted by Nelson Pass View Post
Jam called me up and asked if I have ever paralleled up a
bunch of 2SK170's and 2SJ74's to make a power output
stage.

I guess it's time to unveil the Beast with a Thousand JFETs.

Here's the first teaser, a circuit panel to hold 588 JFETs and
associated resistors.
What can I say. Its a pleasure to see a master at work.
diyAudio Member
Views 923 Comments 0 DougL is offline
Old

Tube Cad Jurnal Interesting Items

Posted 9th September 2009 at 03:59 PM by DougL

In John's TCJ Blog He featured the Logitech power supplies For Duet and Squeezebox.

Since I have an SB3 and have been thinking of upgrading the power supply, this is a great source of inspiration to me.

https://www.tubecad.com/2009/09/blog0170.htm
diyAudio Member
Views 1296 Comments 2 DougL is offline
Old

Zero Feedback Impedance Amplifiers

Posted 2nd September 2009 at 04:15 PM by DougL
Updated 2nd September 2009 at 05:52 PM by DougL

This amplifier is also an example of original thinking. https://www.diyaudio.com/forums/showthread.php?t=42259

For anyone interested, here is the URL to the Amplifier.
https://www.audiophonics.com/audiophonics-zeus-about.html

I think this design just made my bucket list.
diyAudio Member
Views 943 Comments 1 DougL is offline
Old

SS Tabor

Posted 1st September 2009 at 02:00 AM by DougL

Someone was discussing a SS version of a tube amp. Look for SS Tabor

https://www.pimmlabs.com/

Cool site.

There are a couple of SS transformer amps.

All of them look cool to me.
diyAudio Member
Views 965 Comments 0 DougL is offline
Old

Project: RAKK DAC

Posted 31st August 2009 at 06:20 AM by DougL

I have had my RAKK DAC going for a while now. Great DAC. I bought a case and the RAKK DAC passive board to replace the EDCOR transformers I was using and I am using the Shunt volume control to select the shunt resistor.

Goal is to get it done this week.
I will post pictures after its complete.
diyAudio Member
Posted in My Projects
Views 1303 Comments 2 DougL is offline
Old

Why is there air?

Posted 31st August 2009 at 02:44 AM by DougL
Updated 31st August 2009 at 05:51 AM by DougL

A series of posts by someone who's nom de plume is an obnoxious comedian. Wonderful.

https://www.diyaudio.com/forums/showthread.php?t=150302
https://www.diyaudio.com/forums/showthread.php?t=150292
https://www.diyaudio.com/forums/showthread.php?t=150252
https://www.diyaudio.com/forums/showthread.php?t=150024
https://www.diyaudio.com/forums/showthread.php?t=150304

Harmless. However, it takes up a lot of the board's energy for a time.
This too shall pass.

I haven't found "Texas" yet. The Mods used to post hilarious commentary along with the outrageous posts. As the board has matured, not so much. It was a deep fried Twinkies kind of guilty pleasure.
diyAudio Member
Views 1147 Comments 4 DougL is offline
Old

Transformers

Posted 31st August 2009 at 12:35 AM by DougL
Updated 31st August 2009 at 05:51 AM by DougL

https://www.diyaudio.com/forums/showt...52#post1910252
Bud is very enlightening.
Its a joy to have him comment positively about several companies.
diyAudio Member
Views 823 Comments 1 DougL is offline
Old

Tubelab PP

Posted 28th August 2009 at 01:35 AM by DougL
Updated 31st August 2009 at 05:52 AM by DougL

Here is an example of engineering I admire.

https://www.diyaudio.com/forums/showthread.php?t=148694
diyAudio Member
Views 826 Comments 0 DougL is offline

New To Site? Need Help?
Copyright ©1999-2017 diyAudio