Hello Oliver, mouser doesn't carry anymore the panasonic relais, could you point me to a reliable substitute from the same site?? or also elsewhere if needed.. thanks!
Mattheus
Got mine here DIP Relays
do it fit flawlessy in the pcb?? thanks anywayHi Mattheus,
you could also use this one here:
Mouser part no. 653-G6A-434P-DC5
Best regards,
Oliver
do it fit flawlessy in the pcb??
Sure, they have the same form factor
hello, would you be so kind to show me which one you got since even the last one posted by dvb is out of sale??Got mine here DIP Relays
hello, would you be so kind to show me which one you got since even the last one posted by dvb is out of sale??
You could order the panasonic relais also at conrad.com, part no.: 505101
Best regards,
Oliver
hello, Oliver, thanks for your last answer...
i can't find proper values for Rk & Ri/v resistors, tube is 6n2p-er.
have a nice day
edit: searched better, Rk is 200R, what about Ri/v? i'm using the 4xtda1541a+dir9001 (raidrop_hui) bluedac, you might know it a little
i can't find proper values for Rk & Ri/v resistors, tube is 6n2p-er.
have a nice day
edit: searched better, Rk is 200R, what about Ri/v? i'm using the 4xtda1541a+dir9001 (raidrop_hui) bluedac, you might know it a little
Last edited:
hello, Oliver, thanks for your last answer...
i can't find proper values for Rk & Ri/v resistors, tube is 6n2p-er.
have a nice day
edit: searched better, Rk is 200R, what about Ri/v? i'm using the 4xtda1541a+dir9001 (raidrop_hui) bluedac, you might know it a little
Ahh..the bluedac. Yes i know it well. So if you use all 4 DAC´s you should insert a R I/V of 18R to 22R.
Pay attention to the quality of the two R I/V´s! I would recommend the following resistors:
- PRP 9372
- Caddock MK132
- Texas Components TX2575 naked Z-Bulk foil (Vishay VAR)
All these you could order at Parts Connexion.
Best regards,
Oliver
Hi Oliver, do you have any experience in using e88cc with the tubeizator??
in fact it does have a mu of 33 against the 100 of the 6n2p, but i was wondering if is enough anyway considering that i'll use with an aikido preamplifier with gain of about 13, actually i'm using another pre, a cathode follower with same gain of the aikido, and the power amplifier get saturated at about half of the volume...
what do you think?? should i try if i obtain these tubes?? (maybe i've scored some)
in fact it does have a mu of 33 against the 100 of the 6n2p, but i was wondering if is enough anyway considering that i'll use with an aikido preamplifier with gain of about 13, actually i'm using another pre, a cathode follower with same gain of the aikido, and the power amplifier get saturated at about half of the volume...
what do you think?? should i try if i obtain these tubes?? (maybe i've scored some)
Hello everyone
I want one of your help and advice ...
I listen to my Buffalo II processors Jensen JT-11-p1 and the sound is very nice ..... but .....
valves me very curious, and I read with great interest the forum-I-Tube Zator ..
those of you who use the Tube-Zator-I + II the buffalo? sounds like? such tubes advise?
thanks and greetings Loredana
I want one of your help and advice ...
I listen to my Buffalo II processors Jensen JT-11-p1 and the sound is very nice ..... but .....
valves me very curious, and I read with great interest the forum-I-Tube Zator ..
those of you who use the Tube-Zator-I + II the buffalo? sounds like? such tubes advise?
thanks and greetings Loredana
My first comment would be the pcb needs the ground line fattening up as much as possible.
$32 is way to high. I am buying similar pcb's from china in quantity for about $14.
I'm interested in the sound of the Tube-I-II Zator with the buffalo , not with imitations Chinese ......!!!
thanks and greetings
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Tube-I-zator Professional PCB