• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

SlewMaster Project Boards

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
J

jwilhelm

Member
Joined 2014
vzaudio.com/
1) Terry - x2
2) kindhornman - x2
3) tjencks - x2
4) carcass - X2
5) Cambe - x2
6) Arthur - x4
7) zrxshack -x2
8) mlloyd1 - x2
9) Carl_Huff - x4
10) Jim Hamley - x2
11) mrsavage - x8
12) gaborbela - x2
13) gwrskien - x4
14) jwilhelm - x4
15) touchdown - x2
16) quan - x2
17) maxwell007 - x2

Make mine 4 if they aren't all spoken for already.
 
SyncTronX

SyncTronX

Member
Joined 2008
1) Terry - x2
2) kindhornman - x2
3) tjencks - x2
4) carcass - X2
5) Cambe - x2
6) Arthur - x4
7) zrxshack -x2
8) mlloyd1 - x2
9) Carl_Huff - x4
10) Jim Hamley - x2
11) mrsavage - x8
12) gaborbela - x2
13) gwrskien - x4
14) jwilhelm - x4
15) touchdown - x2
16) quan - x2
17) maxwell007 - x2
18) SyncTronX - x2

I added two for me please. Terry you did your magic on these and verified them
yes? Anyone do a BOM yet or
 
S

spind

Member
Joined 2003
Paid Member
1) Terry - x2
2) kindhornman - x2
3) tjencks - x2
4) carcass - X2
5) Cambe - x2
6) Arthur - x4
7) zrxshack -x2
8) mlloyd1 - x2
9) Carl_Huff - x4
10) Jim Hamley - x2
11) mrsavage - x8
12) gaborbela - x2
13) gwrskien - x4
14) jwilhelm - x4
15) touchdown - x2
16) quan - x2
17) maxwell007 - x2
18) SyncTronX - x2
19) spind - x2

If available---thanks!
 
E

evanc

Member
Joined 2009
spind...your in.
At this point all ordered OPS boards are spoken for. If there is interest we could order another round. As of yet there is no delivery date from the shipper. As soon as I have info I will pass it on. Once I have the boards I can finalize price and go about collecting shipping addresses.
Thanks, Evan
 
E

evanc

Member
Joined 2009
Boards are here and look good. I sent samples to ostripper for approval as well as a couple members for beta testing. I think it would be smart to wait until one set gets built up to confirm they are OK before sending them out to all group buy participants.

Boards will be $15 each. This includes paypal fee but not postage. Shipping to US addresses will be $6.00. International will have to be case by case. For reference boards went to Greece for $26.50 and Canada for $21.95.

At this time if you would all like to PM me your postal addresses and paypal addresses I can start getting shipping costs together and invoices sent out. If any members are against paypal let me know and we can work out alternate payment.

I won't be back at a computer until late tonight.
Thanks to all,
Evan
 
ostripper

ostripper

Member
Joined 2008
still4given said:
They have not been tested yet but I have great faith that OS, Jason and Jeff have done their homework on this. I am looking forward to building a pair.
Click to expand...

I'm currently stuffing these with resistors. All passives fit perfectly. All semi's,too.
Compared it to the CAD - perfect match , no errors.

You won't need a lead jig or bender for any of the diodes or 1/4w-1/2w resistors.
Bends right to the component body are perfect for the 6mm (1/4w) and 9mm(1/2w).
I had to bend them to spec (different) on Jasons boards.

The Euro's are tight , but fit. Blue and orange ones fit , but the high current green ones do not.

Faston and fuse holes will fit both styles of each.

The only slight issue is you have to use a slightly smaller 12mm output coil -
20 turns on a AAA battery.

You also will not have to use the 4 PCB mounting holes (you can ,if you want), the 10 outputs
will support the PCB. You might want to place plastic push through spacers
in the holes on the power connection end of the board.

OS
 
E

evanc

Member
Joined 2009
1) Terry - x2 - shipped
2) kindhornman - x2 - invoiced
3) tjencks - x2 - invoiced
4) carcass - X2 - Acknowledged
5) Cambe - x2 - invoiced
6) Arthur - x4 - Acknowledged
7) zrxshack -x2 - invoiced
8) mlloyd1 - x2 - invoiced
9) Carl_Huff - x4 - out
10) Jim Hamley - x2 - invoiced
11) mrsavage - x8 - invoiced
12) gaborbela - x2 - Acknowledged
13) gwrskien - x4 - Acknowledged
14) jwilhelm - x4 - shipped
15) touchdown - x2 - Acknowledged
16) quan - x2 - Acknowledged
17) maxwell007 - x2 - Acknowledged
18) SyncTronX - x2 - invoiced
19) spind - x2 - Acknowledged

I will send out boards as I get payment. I am able to invoice boards going to US addresses ...shipping is all the same. International I will check shipping price and contact you with totals as soon as possible.
Thanks for your patience,
Evan
 
E

evanc

Member
Joined 2009
1) Terry - x2 - shipped
2) kindhornman - x2 - invoiced
3) tjencks - x2 - shipped
4) carcass - X2 - Acknowledged
5) Cambe - x2 - invoiced
6) Arthur - x4 - Acknowledged
7) zrxshack -x2 - shipped
8) mlloyd1 - x2 - invoiced
9) Carl_Huff - x4 - out
10) Jim Hamley - x2 - invoiced
11) mrsavage - x8 - invoiced
12) gaborbela - x2 - Acknowledged
13) gwrskien - x4 - Acknowledged
14) jwilhelm - x4 - shipped
15) touchdown - x2 - Acknowledged
16) quan - x2 - Acknowledged
17) maxwell007 - x2 - Acknowledged
18) SyncTronX - x2 - invoiced
19) spind - x2 - Acknowledged

US packages are shipping.

I checked on less expensive international shipping. Looks to be about $14.00 to most destinations. I will be invoicing over the next day or two.

Thanks,
Evan
 
E

evanc

Member
Joined 2009
1) Terry - x2 - shipped
2) kindhornman - x2 - invoiced
3) tjencks - x2 - shipped
4) carcass - X2 - invoiced
5) Cambe - x2 - invoiced
6) Arthur - x4 - invoiced
7) zrxshack -x2 - shipped
8) mlloyd1 - x2 - invoiced
9) Carl_Huff - x4 - out
10) Jim Hamley - x2 - invoiced
11) mrsavage - x8 - invoiced
12) gaborbela - x2 - invoiced
13) gwrskien - x4 - invoiced
14) jwilhelm - x4 - shipped
15) touchdown - x2 - invoiced
16) quan - x2 - invoiced
17) maxwell007 - x2 - invoiced
18) SyncTronX - x2 - invoiced
19) spind - x2 - Acknowledged

I believe I have contacted everyone on the list. Please let me know if I missed anyone.

It looks like there will be a few pair of boards left for people who want them.
Thanks,
Evan
 
E

evanc

Member
Joined 2009
1) Terry - x2 - shipped
2) kindhornman - x2 - invoiced
3) tjencks - x2 - shipped
4) carcass - X2 - invoiced
5) Cambe - x2 - invoiced
6) Arthur - x4 - invoiced
7) zrxshack -x2 - shipped
8) mlloyd1 - x2 - invoiced
9) Carl_Huff - x4 - out
10) Jim Hamley - x2 - paid and packed
11) mrsavage - x8 - invoiced
12) gaborbela - x2 - paid and packed
13) gwrskien - x4 - paid and packed
14) jwilhelm - x4 - shipped
15) touchdown - x2 - invoiced
16) quan - x2 - invoiced
17) maxwell007 - x2 - invoiced
18) SyncTronX - x2 - invoiced
19) spind - x2 - invoiced

I believe I have contacted everyone on the list. Please let me know if I missed anyone.

It looks like there will be a few pair of boards left for people who want them.
Thanks,
Evan
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom