Request for schematic
Hi Kmaier,
Please send me a copy of the schematic and BOM if available.
bravi@xtra.co.nz
Hi Kmaier,
Please send me a copy of the schematic and BOM if available.
bravi@xtra.co.nz
I did this as a small project for my son last year, then offered it up as a DIY project on AC. Also have a 2A3 version, but would use something different for a 300B. I can send anyone interested the PDFs and RTFs for cleaner schematics and BOM lists. They sound very nice using good parts and a clean layout, specs are excellent (within 1dB past 30KHz with good OPTs) if you get some good (read NOS) tubes and match them up well.
Regards, KM
PS - larger direct jpeg image here... hope it's viewable.
Hi kmaier
If you don't mind I would like to have 45 schematics and BOM as well.
my email: m461c14n (at) gmail.com.
Thanks
HI Kmair,
I am a Dutch newbie with a lot of solder experience and a couple of nice 45 tubes. I am not able to calculate the whole schematic, but I want to build an amp with these tubes. Over here there are barely no people with 45-exprience.
Would you be so kind sending me the schematic and BOM for the 45? My email address is:
martijn at expotief dot nl
Regards
Martijn
I am a Dutch newbie with a lot of solder experience and a couple of nice 45 tubes. I am not able to calculate the whole schematic, but I want to build an amp with these tubes. Over here there are barely no people with 45-exprience.
Would you be so kind sending me the schematic and BOM for the 45? My email address is:
martijn at expotief dot nl
Regards
Martijn
Try Machmat, and Triodedick, both Dutch with a lot of experience with DHTs in general.
MachMat tube and part sales
Triode Dick's Page
Nothing specific on 45s on either of the above sites, however I thought they might provide some useful information nonetheless.
Machmat has changed hands, consequences yet to be seen.
There is a 45 design on my site that may be of interest.
MachMat tube and part sales
Triode Dick's Page
Nothing specific on 45s on either of the above sites, however I thought they might provide some useful information nonetheless.
Machmat has changed hands, consequences yet to be seen.
There is a 45 design on my site that may be of interest.
Last edited:
Hi Kmaier,
Would you please send me the schematic and BOM list for 45 & 2A3.
My email address: qbinhtran@hotmail.com
Regards,
Binh
Would you please send me the schematic and BOM list for 45 & 2A3.
My email address: qbinhtran@hotmail.com
Regards,
Binh
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- Looking for a 45 SE Schematic