I got my new lamp. It is for commercial projection use. people use it to replace the

[roybatty]

Hi, I was just directed to this forum today, a great community by the looks of things.
My old beloved Panasonic AE100 blew her second bulb the other week (after a long life). I went out and bought a new PT- AX200E, thinking it may be a good time to upgrade.
My old machine still works well, I have stripped it down a few times to clean the filters and panels, and seeing an alternative to an expensive lamp discussed here. I would like to have a go at replacing the globe instead of throwing the old girl in the bin. \
I have been over to http://www.diypro.us but am a little unsure of the correct bulb, and the specs on my current bulb are limited.
I need a replacement for a "ET-LAE100 lamp Type: 120W UHM". Could anyone assist with the correct replacement bulb?

Cheers

 

[ywh]

theaulait69 !
I search S25 again and again, but no inf ;-(
can you open it take some pictures?

Hi batyo !
thanks! is that chaolin like dust ?

Hi roybatty !
you need 120w BSM-AC , price is $80, shipping is $5

 

[theaulait69]

TLPLV5 lamp replacement

Hi Ywh,
I give you some pictures :

You can see there is a broken electrode and the other is burned
I hope these pictures helped you helping me

Sorry for my poor english.
Good bye

 

[theaulait69]

Glue

Hi Ywh,
I have another question : How hot is the lamp when the projector is working ?
This is to find a good ciment or glue ?
Thanks,
Théo.

 

[batyo]

glue

Hi YWH,

Yes, it looks like flour.The colour is changing depends on how clean.If you buy it cheap,it is yellowish.
I'v tested Al2O3 also.Looks much nicer.Realy white .It's meltpoint is 2050 celsius.

 

[Ripchord]

Hi everybody!

YWH, I have the Infocus X2 can you point me to the correct bulb to get?

I have the link to 18wheeler site.

 

[roybatty]

Thanks ywh,
Please confirm the BSM-AC-H or the BSM-AC-L.
My current lamp has no mount on the base, just glass right to the end.
here is a shot of my old bulb.

An externally hosted image should be here but it was not working when we last tested it.

Cheers
Roy.

 

[ywh]

Hi theaulait69 !
the bulb is DC, bigger pole is +,
I think 300 c is OK for this lamp

thanks batyo again

Hi Ripchord
you need 200W bsm-dc, price is $80, shipping is $5. dont forget the fee of paypal

Hi roybatty !
need to see ballast

 

[theaulait69]

TLPLV5 lamp replacement

Hi Ywh,
Ok it's DC,
do you have a compatible lamp for me ? Can i buy it with diypro.us ?
Do you think a JYs-SE lamp or a BSM-DC will work ? what is the better one for me ? good bye
Théo

 

[Hynotech83]

Hi jason132pop!
you need 270W BSV-DC, not so bright, but only $40.Order via the site http://www.diypro.us/. OK!
can not do External ballast and super-bright lamp. it is 270w.

Hi Hynotech83 !
yes! it is DC. you need 200w BSM-DC, price is $80, shipping is $5.

Hi brcosminp !
you are the first man from Rumanian, nice to see you .
you need 200w BSM-DC too, price is $80, shipping is $5.that is a bulb only without reflector.about 1000hrs

Hello YWH,

Was wondering If I can get discount on $80 since I tried paying for Bulb through http://diypro.xiaofish.us/lamps.html

Please let me know if possible how much i need to pay

If this works I will buy alot more from you....

Thank you

John'

Receipt from paypal transaction:

http://i26.photobucket.com/albums/c101/hypnotech1983/Picture2.png

 

[mrpman]

HELP!! Thanks YWH Got my New Bulb..

DOES Anyone know what the right position to put the replacement bulb in a Benq PE 8700 Housing???


My projector is displaying very dim with new bulb

I got the 200 NSH DC from YWH and installed


The details written on the Bulb are as follows:

NSH210BQA
325072205
GH2739
60.J2104.CG1

 

[roybatty]

Hi roybatty ! need to see ballast.

Thanks for all your help on this ywh.

Here is a close up of the electrodes..

An externally hosted image should be here but it was not working when we last tested it.

And the ballast unit....

An externally hosted image should be here but it was not working when we last tested it.

I think if the only lamp you can get has the metal sleeve on on the tail end, I will still be able to fit it in my lamp housing.

Cheers
Roy

 

[ywh]

Hi Hynotech83 !
you can paying for Bulb through http://diypro.xiaofish.us/lamps.html , but need wait longer time, sometimes.

Hi mrpman !
give me a email, I will send some inf to you.

Hi roybatty!
that is BSM-AC-H

 

[roybatty]

Thanks ywh, I will place an order shortly!

Cheers
Roy

 

[Hynotech83]

Hi Hynotech83 !
you can paying for Bulb through http://diypro.xiaofish.us/lamps.html , but need wait longer time, sometimes.

Hi mrpman !
give me a email, I will send some inf to you.

Hi roybatty!
that is BSM-AC-H

Hello YWH,

Order placed!! For 200w BSM-DC!!
Here is receipt:
http://i26.photobucket.com/albums/c101/hypnotech1983/Picture3.png

Need money back for: http://i26.photobucket.com/albums/c101/hypnotech1983/Picture4.png

Thank you YWH

 

[Ripchord]

Hi theaulait69 !
the bulb is DC, bigger pole is +,
I think 300 c is OK for this lamp

thanks batyo again

Hi Ripchord
you need 200W bsm-dc, price is $80, shipping is $5. dont forget the fee of paypal

Hi roybatty !
need to see ballast

Thanks ywh
I have sent payment $89.00 I take it the $4.00 is the paypal.

thanks again!

 

[theaulait69]

TLPLV5 lamp replacement

Hi Ywh,
Need I JYs-SE DC lamp or BSM-DC lamp , or another one ?
Thanks,
Théo

 

[Ripchord]

Hello YWH,

Was wondering If I can get discount on $80 since I tried paying for Bulb through http://diypro.xiaofish.us/lamps.html

Please let me know if possible how much i need to pay

If this works I will buy alot more from you....

Thank you

John'

Receipt from paypal transaction:

http://i26.photobucket.com/albums/c101/hypnotech1983/Picture2.png

To my understanding its a trial and error sliding the bulb back and forth in the reflector till you find the brightest position,then ceramic the bulb in place.

I have not tried it yet but sounds fun
hope this helps?

 

[Ripchord]

HELP!! Thanks YWH Got my New Bulb..

DOES Anyone know what the right position to put the replacement bulb in a Benq PE 8700 Housing???


My projector is displaying very dim with new bulb

I got the 200 NSH DC from YWH and installed


The details written on the Bulb are as follows:

NSH210BQA
325072205
GH2739
60.J2104.CG1

sorry I meant to quote mrpman the 1st time

 

[ywh]

Hi theaulait69 !
sorry forgot that is BSM-DC .