Hi Peter !
Thanks for this group buy, I received the 4 PCB for the amplification parts, but not the PSU boards yet.
Are you sending it in a separate mail ?
Contact me through email, I need your name to check it out.
Contact me through email, I need your name to check it out.
email sent!
Please post any technical questions in this thread: http://www.diyaudio.com/forums/showthread.php?t=145387&page=15
Please post any technical questions in this thread: http://www.diyaudio.com/forums/showthread.php?t=145387&page=15
Sorry for posting at wrong place.
Seems I am always a little short on getting in on PCB buys. I'd really love 2 pairs of boards (for biamping). Please keep me in the loop if you decide to make another run.
In the mean time if someone has boards they decided not to use, I am interested. I could always trade for other boards I have you might want.
In the mean time if someone has boards they decided not to use, I am interested. I could always trade for other boards I have you might want.
Peter,
On the schematic you graciously supplied with the pcb's there are several electrolytic caps in the circuit. Are these just signal voltage items requiring something like 25 volt caps. Will 28 volt rails work considering the extra pair of outputs.
I have been rereading the reviews on the Aleph J and being as the stock item is considered a real winner will try it first. If I do not get enough output I can build the balanced X.
Tad
On the schematic you graciously supplied with the pcb's there are several electrolytic caps in the circuit. Are these just signal voltage items requiring something like 25 volt caps. Will 28 volt rails work considering the extra pair of outputs.
I have been rereading the reviews on the Aleph J and being as the stock item is considered a real winner will try it first. If I do not get enough output I can build the balanced X.
Tad
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Aleph J-X pcb group buy