• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Ideal bridge rectifier GB

Jump to Latest
nautibuoy

nautibuoy

Member
Joined 2010
GB for Saligny HV;

nautibuoy - 2 Saligny HV
Jazid - 2 Saligny HV
ste - 1 Saligny HV
Luca72c - 2 Saligny HV
Rinman77 - 2 Saligny HV
merlin el mago - 2 Saligny HV

Total = 11

If you're interested copy and paste the list to a new post and add your name and requirements to the bottom of the list.
 
nautibuoy

nautibuoy

Member
Joined 2010
No problem Felipe.

We can leave this open for a while to see if there is any more interest and we can sort out payment, distribution etc. closer to when Tibi can supply.

GB for Saligny HV;

nautibuoy - 2 Saligny HV
Jazid - 2 Saligny HV
ste - 1 Saligny HV
Luca72c - 2 Saligny HV
Rinman77 - 2 Saligny HV
merlin el mago - 1 Saligny HV

Total = 10
 
The traveller

The traveller

Member
Joined 2010
tvicol said:
Well, give me 1000 people like you, so I can justify such project.

Regards,
Tibi
Click to expand...

Hi Tibi,
I was looking at your EvoTtronix website and you seem sell the low current version is that correct? The site says minimum order for EU is 10units, is that correct?
I am in the EU and I need 4 maybe 5. At a later date I need 2 HC versions. I am really waiting for these unit’s
 
analog_sa

analog_sa

Member
Joined 2002
tvicol said:
Please note that Saligny will work with center taped transformers (and center taped used as main reference ground) only when both sections are in phase. This was discussed here.
Click to expand...


Thanks to a very observant friend who noticed the frequency of ripple, the mystery shrouding the weird synphase connection has finally been revealed :)

It is perhaps worth warning any adventurous synphasers that in this mode the 4320 works as a parallel half wave rectifier with the obvious increase in ripple. It may be appropriate for this info to also find a spot within the first post of this thread.

The 50Hz ripple can be seen in both simulation and measurements.

In the standard unipolar connection the 4320 applies out of phase control signals to the opposing fets in the bridge, emulating the behaviour of a standard diode bridge. In the synphase connection this changes and the opposing fets get synphase signals at their gates, effectively working in parallel.

Below is the 50Hz ripple waveform from the synphase simulation. In the standard connection this is of course 100Hz.

On the plus side this is an elegant way to achieve half wave rectification without passing dc through the transformer secondary.
 

Attachments

  • 50Hz.JPG
    50Hz.JPG
    74.8 KB · Views: 369
S

s610adam

Member
Joined 2013
GB for Saligny HV;

nautibuoy - 2 Saligny HV
Jazid - 2 Saligny HV
ste - 1 Saligny HV
Luca72c - 2 Saligny HV
Rinman77 - 2 Saligny HV
merlin el mago - 1 Saligny HV
nightsky -2 Saligny HV
s610adam - 4 Saligny HV

Total = 16


Updated, almost lost track - my thread update emails stopped happening
 
You must log in or register to reply here.
Top Bottom