Considering building the BK-16 folded horn. This is my first diy horn. Looking at making the cabinets a little slimmer and taller, by an inch or two. Will compensate for reductions in the cabinet widths with height increases. The Vb won’t change and area openings of the throats & mouths will remain the same; however, the mouth opening dimensions will change a bit. Is this OK?
Considering building the BK-16 folded horn. This is my first diy horn. Looking at making the cabinets a little slimmer and taller, by an inch or two. Will compensate for reductions in the cabinet widths with height increases. The Vb won’t change and area openings of the throats & mouths will remain the same; however, the mouth opening dimensions will change a bit. Is this OK?
To be honest, look for another design. From memory, the horn path is a bit too short.
ZillaSpeak - Speakers
I built these years ago and thought they had a hollow sound. But they did have a dynamic sound too which got me interested in back horns.
Godzilla
I built these years ago and thought they had a hollow sound. But they did have a dynamic sound too which got me interested in back horns.
Godzilla
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Full Range
- BK-16 Folder Horn - Change Dimensions