So you have a 3-way. with a crossover connected to the horn. on top.
1x Woofer
2x Mids
1x Tweeter/Horn
Is this right?
Do you have a lead wire (pair) connecting to each speaker Left and Right?
Or do you have more that one?
All I can see is a pair of color black/yellow. post "52 and "54. If so just move them (set) to your new speaker in the same arrangement/distances.
1x Woofer
2x Mids
1x Tweeter/Horn
Is this right?
Do you have a lead wire (pair) connecting to each speaker Left and Right?
Or do you have more that one?
All I can see is a pair of color black/yellow. post "52 and "54. If so just move them (set) to your new speaker in the same arrangement/distances.
Hi,
An issue is the 3 wire connection. Centre brown is common.
One yellow goes to the bass unit, the other to mids/treble.
rgds, sreten.
An issue is the 3 wire connection. Centre brown is common.
One yellow goes to the bass unit, the other to mids/treble.
rgds, sreten.
Excellent...so move them to the new boxes and cut the wire that comes from the woofer (leaving length to it to hook up to the speaker terminal)? So it looks as though I don't need to do anything except put the wires from the woofer into a speaker terminal for the back of each new speaker box? Correct?
Inductor...I believe so. I attached a photo of the original advertisement booklet. But yes, there are 4 speakers.
Inductor...I believe so. I attached a photo of the original advertisement booklet. But yes, there are 4 speakers.
Note. You will loose some front baffle size with small speakers, but that might be insignificant.
Speaker Binding Posts:
Binding Posts & Plates in the Speaker Components Department at Parts Express | 309
https://www.madisoundspeakerstore.com/binding-posts/
Speaker Binding Posts:
Binding Posts & Plates in the Speaker Components Department at Parts Express | 309
https://www.madisoundspeakerstore.com/binding-posts/
Attachments
- Status
- Not open for further replies.