Hi
Trying to diagnose a problem with my player, if you have the Service Manual/ schematic for the Rotel RCD991 CD player, suggest a price and please email me
Thanks
Rick
Trying to diagnose a problem with my player, if you have the Service Manual/ schematic for the Rotel RCD991 CD player, suggest a price and please email me
Thanks
Rick
Rotel normally gives these out for free (.pdf file). Have you contacted them?
That will be $5
Chris
That will be $5

Chris
Hi Guys
Rotel have the normal operational manuals, but I didn’t see their
service manuals in a search.
Thanks
Rotel have the normal operational manuals, but I didn’t see their
service manuals in a search.
Thanks
Thanks Ruach
I had appeared from here that you may have but the operational manual
When you're ready . .
Cheers
I had appeared from here that you may have but the operational manual

When you're ready . .
Cheers
service manual of RCD991 and RCD971 sent.
Please share the service manual with others on diyaudio.
Regards
Please share the service manual with others on diyaudio.
Regards
Hi Ruach,
The manual for the 991 is just under 8.1 Mb, some ISPs (inc mine) won’t allow individual emails that big . .
I've saved the RCD971 if anyone ever needs it
Ruach hopefully when you have time you can send a zipped 991 manual 😉
Thanks Again
The manual for the 991 is just under 8.1 Mb, some ISPs (inc mine) won’t allow individual emails that big . .
I've saved the RCD971 if anyone ever needs it
Ruach hopefully when you have time you can send a zipped 991 manual 😉
Thanks Again
ROTEL RCD-971
Hi , does anyone have the shematics of ROTEL RCD-971 ?
My e-mail is Staykov1975@abv.bg
Thanks in advance .
Hi , does anyone have the shematics of ROTEL RCD-971 ?
My e-mail is Staykov1975@abv.bg
Thanks in advance .
Service manual Rotel RCD 971
Hello Rick from Melbourne, I would greatly appreciate if you could help with the service manual for this player. I bought a modded one which has some "issues" I am trying to solve, probably needs a new lasermechanism, and have been advised I may need to adjust the settings for the servo if I install a new one, thus need for a manual. Sounds very good, but skips etc. Think This is cause of problem. As am not a full member yet, unable to email you direct, if anybody else can help, ,I would be most grateful!
Hello Rick from Melbourne, I would greatly appreciate if you could help with the service manual for this player. I bought a modded one which has some "issues" I am trying to solve, probably needs a new lasermechanism, and have been advised I may need to adjust the settings for the servo if I install a new one, thus need for a manual. Sounds very good, but skips etc. Think This is cause of problem. As am not a full member yet, unable to email you direct, if anybody else can help, ,I would be most grateful!
RCD991
I also need the Service Manual for RCD 991.
If anyone can send it, I would greatly appreciate!
arissynod(at)gmail(dot)com
Thx in advance!
I also need the Service Manual for RCD 991.
If anyone can send it, I would greatly appreciate!
arissynod(at)gmail(dot)com
Thx in advance!
Service Manual for RCD 991
I also need the Service Manual for RCD 991.
If anyone can send it at miz@shaw.ca, I would greatly appreciate!
Thank you in advance!
I also need the Service Manual for RCD 991.
If anyone can send it at miz@shaw.ca, I would greatly appreciate!
Thank you in advance!
Please send the RCD991 sevice manual to the below e-mail adress
sotam@jetfly.myserver.org
or give me the informtion of the power transformer input and all oupt voltage rating. My RCD991 power transform is defected and the sevice center claimed that there is no spare part for replacement. I need the transformer spec.
sotam@jetfly.myserver.org
or give me the informtion of the power transformer input and all oupt voltage rating. My RCD991 power transform is defected and the sevice center claimed that there is no spare part for replacement. I need the transformer spec.
Hi,
If someone sends me the manual, I'll post it on my web server for a few weeks with a posted link here in the forum.
Contact me through the email button below and I'll reply with my address.
-David
If someone sends me the manual, I'll post it on my web server for a few weeks with a posted link here in the forum.
Contact me through the email button below and I'll reply with my address.
-David
- Status
- Not open for further replies.