I'm looking for one or more chipamp.com CCRC power supply boards like the one seen here (top left pcb): http://www.6moons.com/audioreviews/realitycheck1/hero_open.jpg
They're the black boards which hold six caps and have an onboard rectifier and heatsink section.
Thanks for looking!
They're the black boards which hold six caps and have an onboard rectifier and heatsink section.
Thanks for looking!
That is, in fact, a pretty close copy (not identical though).
If anyone has some extras laying around, I'd still prefer the original.
If anyone has some extras laying around, I'd still prefer the original.
Necromancing this thread
Sent a couple of PMs to those that responded previously.
I am similarly searching for some of these black briangt ccrc boards.
Please let me know if you have any more to sell here or via PM.
Thanks
Sent a couple of PMs to those that responded previously.
I am similarly searching for some of these black briangt ccrc boards.
Please let me know if you have any more to sell here or via PM.
Thanks
CN - if you can't find those exact boards, I recently made a run of CCRC boards for some amps I'm rebuilding with tight footprint inside. Perhaps they could work for your build?
Both are CCRC, fit 35mm / 10mm pitch caps, fit on 10mm grid bottom plates, and are 154 mm x 76 mm.
One is a dual rail, with center tap option.
The other is 2 single rails with the rails running in opposite directions to keep PSU to amp board wiring shorter and symmetrical.
I used 5W resistors that stand up to save space for this layout, take note on that.
Rectifiers aren't on board...
PM me if you're interested.
Both are CCRC, fit 35mm / 10mm pitch caps, fit on 10mm grid bottom plates, and are 154 mm x 76 mm.
One is a dual rail, with center tap option.
The other is 2 single rails with the rails running in opposite directions to keep PSU to amp board wiring shorter and symmetrical.
I used 5W resistors that stand up to save space for this layout, take note on that.
Rectifiers aren't on board...
PM me if you're interested.
Attachments
Hi rhthatcher
Those look very nice...as does your Aleph build.
The main reason I am looking for these old briangt boards is because I already have one pair partially populated that I got in a box deal from someone on the forum who got out of the DIY scene.
I want to build a few pairs of stereo amps to play with mult-way active speakers.
I’d like to have matching boards.
I got a few responses...committed to one pair already...still working on a second pair.
Those look very nice...as does your Aleph build.
The main reason I am looking for these old briangt boards is because I already have one pair partially populated that I got in a box deal from someone on the forum who got out of the DIY scene.
I want to build a few pairs of stereo amps to play with mult-way active speakers.
I’d like to have matching boards.
I got a few responses...committed to one pair already...still working on a second pair.