woOT!!! almost perfect!

Status
Not open for further replies.
Well I finaly gutted my LCD and found that it i could use about 3/4's of the screen un ubstrucked (a small strip of pcb on the bottom blockes off about 1 1/2" so I picked up a Apollo concept 2210 ohp from office depot with intentions of returning it after testing. Placing the bare lcd on the stage, fired it up and saw a beautifull winXP boot splash on my wall (backwards and flipped) but crystal clear.😱

my only problems (other than the bottom part being coverd) is that after 2-3mins the lcd starts to get realy warm, almost hot.

any ideas on how to fix that or is that harmfull?
 
I posted some pics in the results thread.

agian

You can see the bottom part that its cut off by the pcb 🙁
Apollo conpect 2210 ohp
An externally hosted image should be here but it was not working when we last tested it.

DC bootin up!
An externally hosted image should be here but it was not working when we last tested it.

random shot of setup..
An externally hosted image should be here but it was not working when we last tested it.

sonic.
An externally hosted image should be here but it was not working when we last tested it.

tokyoX Very hard to try and play and take pics
An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.
 
Status
Not open for further replies.