I have not test the Warpspeed on the fully build Dodd buffer.
But the analog pot will hold back the sound, that's the reason I build the inline buffer 😀
Warpspeed + Dodd buffer = Great combo.
But the analog pot will hold back the sound, that's the reason I build the inline buffer 😀
Warpspeed + Dodd buffer = Great combo.
Anyone in DFW want to audition, please drop a note.
Mac Min > Warpspeed > Dodd buffer > Class D Audio amp > Dunlavy SCIV
😀
Mac Min > Warpspeed > Dodd buffer > Class D Audio amp > Dunlavy SCIV
😀
Great offer for audiophiles in Dallas and the Metroplex...I'm quite familiar with Plano, Frisco, Richardson, Irving, and surrounding areas.
The traveling unit never took off, as so far only 3 members have expressed interest...
The traveling unit never took off, as so far only 3 members have expressed interest...
Great sounding Warpspeed, easy to build.
Here is the part list from Mouser if you want to build the Warpspeed like mine.
NAC3FCB Neutrik Standard Circular Connectors
NAC3MPB-1 Neutrik Standard Circular Connectors
Mouser Electronics - Electronic Component Distributor 546-1455T2202
450-1755 Eagle Plastic Devices Knobs & Dials
Toggle switch, LED light, 125 K resistor, RCA jacks, fuse and fuse holder (use inline fuse holder much easier).
😀
Here is the part list from Mouser if you want to build the Warpspeed like mine.
NAC3FCB Neutrik Standard Circular Connectors
NAC3MPB-1 Neutrik Standard Circular Connectors
Mouser Electronics - Electronic Component Distributor 546-1455T2202
450-1755 Eagle Plastic Devices Knobs & Dials
Toggle switch, LED light, 125 K resistor, RCA jacks, fuse and fuse holder (use inline fuse holder much easier).
😀
Warpspeed and Dodd buffer combo
Yes this combo is pure magic in my system
TungT which tube are you using in the Dodd. I switched to a 6v russian (not 6H30 yet) which worked better for me with long cable runs
Yes this combo is pure magic in my system
TungT which tube are you using in the Dodd. I switched to a 6v russian (not 6H30 yet) which worked better for me with long cable runs
^^^^^
I'm using 6H30DR, I do have a rare find tube and it does sound little smoother than the 6H30DR tube with a same 1986 date code.
🙂
Let me know I can let you borrow one.
I'm using 6H30DR, I do have a rare find tube and it does sound little smoother than the 6H30DR tube with a same 1986 date code.
🙂
Let me know I can let you borrow one.
So, have you had enough interest for the audition? I am trying to figure out if it is so awesome I need two 😉
Stuck at 4. You know I'm bias all the way...so I'll let the builders chime in. 3 are multiple unit buyers so far...
I think you have my email somewhere...🙂
I think you have my email somewhere...🙂
All the way from Slovenia..."The sound is to die for. So clear and full and also detailed, organic, multidimensional....If you just could listen to it🙂 I will enjoy listening a lot in coming days. I will make a more detailed review when I am ready."
Attachments
Last edited:
Thanks for posting my warpspeed build Blues....)
I see you like it...
Now there are 28 of them around the globe, I would like to see more reviews from owners.
I see you like it...
Now there are 28 of them around the globe, I would like to see more reviews from owners.
It's ready to take-off
Ok here's the list...from the PNW to the Midwest, East Coast then back to the West.
10 days to 14 days max at each location. USPS Priority Mail Medium Box Insured/Delivery Confirmed for $14.50 Postage Price Calculator to the next person on the list. Email me for address or PM member directly. As a courtesy to the next user please replace batteries when it reaches 6V (4x 9V alkalines). Don't get your hopes up on the quality of the build as this is my prototype but it will give you an idea on the performance of optocouplers.
Please handle the unit with care so we could get this going as long as possible. Label box "Fragile" when shipping.
I just need to put a bottom plate and it's ready to go on the road by Monday 9/26/11.
RClark (AC/diyA)
Redmond, Wa. 98052
bpape (AC)
Wildwood, MO 63040
gooberdude (AC)
St Louis, MO 63101-1285
ejfud (AC)
St Paul MN 55116
RWolters (AC/diyA)
Farmington Hills, MI 48336
usp1 (AC)
Champaign, Illinois 61822 -complete address please
praedet (AC/diyA)
Newport, VA 24128
Occam (AC)
Brooklyn, NY 11215
mjosef (AC)
Brooklyn NY 11225
Tea-Bag (diyA)
Kennebunk, ME 04043
drjlo (diyA)
Upland, CA 91784
morganc (AC)
Mill Valley, CA 94941
Arkudos (diyA) -address please
CA
Ok here's the list...from the PNW to the Midwest, East Coast then back to the West.
10 days to 14 days max at each location. USPS Priority Mail Medium Box Insured/Delivery Confirmed for $14.50 Postage Price Calculator to the next person on the list. Email me for address or PM member directly. As a courtesy to the next user please replace batteries when it reaches 6V (4x 9V alkalines). Don't get your hopes up on the quality of the build as this is my prototype but it will give you an idea on the performance of optocouplers.
Please handle the unit with care so we could get this going as long as possible. Label box "Fragile" when shipping.
I just need to put a bottom plate and it's ready to go on the road by Monday 9/26/11.
RClark (AC/diyA)
Redmond, Wa. 98052
bpape (AC)
Wildwood, MO 63040
gooberdude (AC)
St Louis, MO 63101-1285
ejfud (AC)
St Paul MN 55116
RWolters (AC/diyA)
Farmington Hills, MI 48336
usp1 (AC)
Champaign, Illinois 61822 -complete address please
praedet (AC/diyA)
Newport, VA 24128
Occam (AC)
Brooklyn, NY 11215
mjosef (AC)
Brooklyn NY 11225
Tea-Bag (diyA)
Kennebunk, ME 04043
drjlo (diyA)
Upland, CA 91784
morganc (AC)
Mill Valley, CA 94941
Arkudos (diyA) -address please
CA
- Status
- Not open for further replies.