Wadia 6 DAC connections problem

I have a wadia 6 without analog output. I check the DAC board and this happens!
I don't know why these cables are not connected (JP5 and JP6 connector). I need help to know where to connect them. Thank you!

wadia6conections1.jpg
wadia6conections2.jpg
 
That's the dash input according to the manual, but it doesn't indicate which area of the P-500 transport they should connect to.

look for images on google and youtube videos of wadia 6 and get to see that they are connected, but do not see where.
 
Last edited:
That is the entrance of the board according to the manual, but does not indicate to which P-500 transport area they must connect.
Look for images on Google and Wadia 6 YouTube videos and get to see that they are connected, but do not see where.
This image is from Google

English please

dave :cop:
diyAudio moderaion team
 
this image is from google
It's rather a different board - the one in your original post looks to have ADI DAC chips (AD1865 perhaps?) whereas this is using PCM63-Ks.

U31 on your included schematic is the Xilinx FPGA and JP5 is definitely the clock input to that chip but from the schematic its unclear if that connector is the only possible clock source.
 
I imagined that at first, that clock signal is missing and the manual does not specify where it gets that clock signal from. unfortunately the version of the manual I got does not have a wiring diagram... 🙁

I am looking for someone from the community who has disassembled this machine and knows where these wires should be soldered...
I am sure that JP6 is the digital input that comes from the P-500 TEAC transport (it has spdif output via fiber optics)
In the morning I will upload some photos to put things more in context.
thanks!