voltage regulator module?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello.

I am building a new system.

I am planning on using a Meanwell 24v SMPS to power:

Tent Clock (10-20V)
Monica 3 DAC (18V)
Twisted pear MUX digital reciever (5-12V)
Nelson Pass B1 Buffer (18-24v)

I am looking for adjustabe voltage regulator modules to supply each of the above at their required level, with the minimum of noise.

For my last project, I was lucky enough to find a couple of Audiocom INVISUS super regs cheaply, but my current budget does not allow for these new.

I have identified the following as possible candidates:

Low Noise Regulator
Voltage regulator board for HiFi HiEND Audio Rubycon ZL on eBay (end time 07-Dec-10 16:46:56 GMT)
Voltage Regulator Module Board, Based on LM317, 1.5-27V on eBay (end time 28-Nov-10 10:11:10 GMT)

Please could members comment on the expected qualities of these, or suggest others? They need to be relatively compact (and good value).
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.