Upgrade emotiva UPA-1 ? :)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello all. I was thinking about Making some upgrades to one of my two mono block (Emotiva UPA-1) just to see if it is posible to get something more out of it. And then put it up to a scoop and see if i can see and hear a diffrence :) I am doing this as fun thing to do for a weekend project. What do you all think will it make a diffrence ? :)
First thing is changing The speaker connections...... they must be one of the cheapest there is. RCA connection maby ?. And then there is the caps, i have no Idea if the are any good at all, they are Seacon 10000uF 50v. I cant find any info at all on them so dont know if they are good or bad. If i was going to upgrade it, what whold be some good caps to change to, it dont have to be any high end caps just some that are known to be a good price/performance. If it Will cost 200€ to upgrade each then it might not be worth it ? All the small caps whold be cheap to change out so that i can do just to see if it makes a difference.

Tell me what you se that you whold change :)
 
Last edited:
Lets test this
 

Attachments

  • DD91596E-B95D-4505-823F-BCCCEE519D4F.jpeg
    DD91596E-B95D-4505-823F-BCCCEE519D4F.jpeg
    270.9 KB · Views: 136
  • D3A6B6E8-2875-4059-A8BA-ED37EAB12BE9.jpeg
    D3A6B6E8-2875-4059-A8BA-ED37EAB12BE9.jpeg
    319.5 KB · Views: 134
It worked now :) i also found something strange om 3 places it says 4u7 but two of them are Rubycon 47uF and one is 4.7. Did someone make a misstake ? :p
What about the utput resistors of 5w 0.25 Ohm. Some say that that type make alot of noice, is it worth changing ? If so, what whold be the best thing ? Like i Said before this is just an experiment :) also the internat wires, maby getting shelded cabeles ?
 

Attachments

  • DC7E06C6-3527-41E8-A790-163B6190002B.jpeg
    DC7E06C6-3527-41E8-A790-163B6190002B.jpeg
    303.7 KB · Views: 120
  • C34CE07B-6967-4AC3-BEEA-F76E01CFBC05.jpeg
    C34CE07B-6967-4AC3-BEEA-F76E01CFBC05.jpeg
    268.1 KB · Views: 116
  • 75E059CF-CCE0-4907-84D7-E836C9F88A06.jpg
    75E059CF-CCE0-4907-84D7-E836C9F88A06.jpg
    813.2 KB · Views: 114
  • 8B8DC2A5-8010-4B21-9752-A9C40C7F97DB.jpeg
    8B8DC2A5-8010-4B21-9752-A9C40C7F97DB.jpeg
    383.4 KB · Views: 74
  • 9977F813-DE30-4366-AEA9-F48C650D2E91.jpeg
    9977F813-DE30-4366-AEA9-F48C650D2E91.jpeg
    387.6 KB · Views: 84
  • A4184A22-D8B5-41C1-9D44-FD7DBF5FCD99.jpeg
    A4184A22-D8B5-41C1-9D44-FD7DBF5FCD99.jpeg
    358.7 KB · Views: 71
  • EFB43637-14BA-4063-89CE-F2016922116A.jpeg
    EFB43637-14BA-4063-89CE-F2016922116A.jpeg
    423.7 KB · Views: 82

PRR

Member
Joined 2003
Paid Member
> utput resistors of 5w 0.25 Ohm. Some say that that type make alot of noice,

Any possible silly thing, SOME one will say it.

Many hi-fi systems run un-grounded perfectly well.

The speaker connectors look fine to me?

If you are displeased with the amp, sell it on.
 
Yes i have seen after a bit of looking around that alot of amps arent grounded and that people how had grounded some have Burt up :) just think it looked a bit strange at first,
That speaker connection feels super cheap and when you twist it it always makes a iretating noice, there are amps for under 70$ that have better connectors Then this. The big Brother XPA-1 got the ”normal” connectors.
I am not displeased with the mono blocks i like them (exept the connectors) i just want to see if they can be better with higher end components inside that is all. If it dosent make a change i will just have one amp where the parts will probobly live a litle but longer then the othere. If it sounds bad after the cap change i will just put them back, and i Will be out 50$ but i will know a litle but more
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.