Hi there
I am looking to build one or 2 of the Pass Amplifiers.
I have found some large Heath Sinks from:
Heatsinks: 9000 Series - 9510HS
They quoted £260 each for a batch of 2
Or £120 for a batch of 10
By buing that quantity the price drops to less than half.
I am in for 4 and need some other members to buy the rest.
I am not doing this for profit my only gain is that I get them at a lower price.
Model is 9510HS size is 400 x 300 x 85 mm width height depth
Group Buy any one.
Al
I am looking to build one or 2 of the Pass Amplifiers.
I have found some large Heath Sinks from:
Heatsinks: 9000 Series - 9510HS
They quoted £260 each for a batch of 2
Or £120 for a batch of 10
By buing that quantity the price drops to less than half.
I am in for 4 and need some other members to buy the rest.
I am not doing this for profit my only gain is that I get them at a lower price.
Model is 9510HS size is 400 x 300 x 85 mm width height depth
Group Buy any one.
Al
Hi reddish75
Well the quote is there for all to see.
Yes it is £120 for the "small ones"
The web site is :
Aluminium Heatsinks, Aluminium Extrusions, Aluminium Extruded products, Aluminium profiles - Birmingham Aluminium
The sink size is 400 width 300 tal and about 83 wide for the small ones
The larger ones are 400 X 400 X83.
I am avvare of Conrad only snag they are a bit far and I was hoping to find some one local.
I have enclosed the quote and the web site address please have a look at the site.
You can search for heat sinks by entering the C/W.
In my case I have tried 0.06 CW.
The same information is in the Balanced F5 tread
But I was looking to get one enclosure capable to work for the XJ100 and eventualy the A75.
Please look at the site and give me your opinion
Many tanks
AL
Well the quote is there for all to see.
Yes it is £120 for the "small ones"
The web site is :
Aluminium Heatsinks, Aluminium Extrusions, Aluminium Extruded products, Aluminium profiles - Birmingham Aluminium
The sink size is 400 width 300 tal and about 83 wide for the small ones
The larger ones are 400 X 400 X83.
I am avvare of Conrad only snag they are a bit far and I was hoping to find some one local.
I have enclosed the quote and the web site address please have a look at the site.
You can search for heat sinks by entering the C/W.
In my case I have tried 0.06 CW.
The same information is in the Balanced F5 tread
But I was looking to get one enclosure capable to work for the XJ100 and eventualy the A75.
Please look at the site and give me your opinion
Many tanks
AL
Attachments
Hi chris
Tanks for the pointer to Conrad I have asked them for a quote
Their MF 35 is 350 wide they list 53 AUS for 150 lenght
If this stand and duble the lenght to 300 I supose we are looking at 106 AUS
Maybe the drop in price for 10 units will warrant the expense for delivery to the UK.
only snag there is a loss of 5omm on the orizzontal spacing, and the fins are only 45 tall.
Maybe I am making a mistake regarding the lenght and should go for 2 200 mm bolted togheter.
Al
Tanks for the pointer to Conrad I have asked them for a quote
Their MF 35 is 350 wide they list 53 AUS for 150 lenght
If this stand and duble the lenght to 300 I supose we are looking at 106 AUS
Maybe the drop in price for 10 units will warrant the expense for delivery to the UK.
only snag there is a loss of 5omm on the orizzontal spacing, and the fins are only 45 tall.
Maybe I am making a mistake regarding the lenght and should go for 2 200 mm bolted togheter.
Al
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Uge Heath sink