Well no, I'm sure they are not. Are they prepared to pay Philips/NXP for a UCD licence, or to comply with Philips/NXPs requirements for licence-free use of the technique?
Why you can't understand THD not only depends on frequency , more on deadtime.
Dimonis... self osc ucd can give 10kw if you want.😀
Make some tests without preamp..use my gain 10 2/3 power divider schematic that i posted a while ago.
Make some tests without preamp..use my gain 10 2/3 power divider schematic that i posted a while ago.
Hi all
sorry for troubling all of you
thanks CPX & Dimonis
word from Apex :
We always must made so many compromise, and never made best amplifier we can. Never can be made best amplifier, nothing is perfect.
RGDS
Manoj
sorry for troubling all of you
thanks CPX & Dimonis
word from Apex :
We always must made so many compromise, and never made best amplifier we can. Never can be made best amplifier, nothing is perfect.
RGDS
Manoj
Hi all
CPX pls provide good schema for ucd
87 to 90% Eff. is good one for me
bandwidth @30KHz
Gain = 65 to 70dB
THD = .001% for 1W
RGDS
Manoj
CPX pls provide good schema for ucd
87 to 90% Eff. is good one for me
bandwidth @30KHz
Gain = 65 to 70dB
THD = .001% for 1W
RGDS
Manoj
special video bass test for Dimonisanother ucd totem pole buffer test, hard test bass low frequency and dummy test with 2 pair mosfet. - YouTube
Hi Dimonis
PLS SEND ME T106-2 CORE; IS IT POSSIBLE TO SEND ITEM TO INDIA???
I HAD ONLY T38-26(YELLOW WHITE)
RGDS
MANOJ
PLS SEND ME T106-2 CORE; IS IT POSSIBLE TO SEND ITEM TO INDIA???
I HAD ONLY T38-26(YELLOW WHITE)
RGDS
MANOJ
manojtm:
What i posted a while ago was a divider for measurering distorsions not a preamplifier schematic.
I do not have a schematic with your requirements but irs2092 cames close to THD 0.07% sometimes if done with 2 transistors only.60db means gain 1000..have you misspelled.😕
Use cut ferite core for testing..the yellow white one is disaster for class D..
I am sad to see that you made the board that i said not to do because it is bad...🙁
norazmi:
You said in one of your clips you improved THD...how is that..you didn't even measure it..😱
What i posted a while ago was a divider for measurering distorsions not a preamplifier schematic.
I do not have a schematic with your requirements but irs2092 cames close to THD 0.07% sometimes if done with 2 transistors only.60db means gain 1000..have you misspelled.😕
Use cut ferite core for testing..the yellow white one is disaster for class D..
I am sad to see that you made the board that i said not to do because it is bad...🙁
norazmi:
You said in one of your clips you improved THD...how is that..you didn't even measure it..😱
Last edited:
hello
hi
greetings just want to ask if T106_2 IS the best core suited for dclass a picture of bridged ucd on the left is a core of SENDUST MATERIAL its cool very
cool yellow core on right amp gets warm so before i order t106_2 is there any
better suited core
warm regards
andrew lebon
hi
greetings just want to ask if T106_2 IS the best core suited for dclass a picture of bridged ucd on the left is a core of SENDUST MATERIAL its cool very
cool yellow core on right amp gets warm so before i order t106_2 is there any
better suited core
warm regards
andrew lebon
Yes..there are many cores you can use:red(t106-2); red/black(t106-14); blue/yellow(t106-17);yellow(t106-6); .
Iron Powder Toroidal Cores (for resonant circuits)
Micrometals, Inc. - Power Cores
Iron Powder Toroidal Cores (for resonant circuits)
Micrometals, Inc. - Power Cores
Thanks , but i feel it a litbit mockery to use a subspeaker without enclosure😕
another ucd totem pole buffer test, hard test bass low frequency and dummy test with 2 pair mosfet. - YouTube