Tubed CCDA I/V Amp for TDA1541(A)

Status
Not open for further replies.
Start mounting the power supply ...
All components are purchased from Farnell, not enter Chinese component in my project.
I decided by Epcos capacitors, are reliable, and amazing quality.
Connectors are male and female, reliable, safe ... comfortable and tidy.

 
We continued riding the circuit oversampling ... we mounted the master clock, to install the SAA7220. NOS mode not is for my ears, fatigue my mind.

The SAA7220 is from a Marantz CD player CD-65 MKII, and the TDA1541A decoupling capacitors are selected EPCOS 100 nf ... I bought 80 units and selected exact values.

NXP is a Philips made component.

 
An important consideration. Never install a chip TDA1541A if you are unsure of its origin.
I do not trust Chinese suppliers ... too many chips have the same week and year of manufacture. It's too risky.

It is much better to buy an old Philips CD player for little money and remove the TDA1541A.

Certainly never would spend a single euro on a TDA1541A S1 or S2 of Chinese origin.

Your project will be as good as the worst of the components you mount
 
Hie there
I have a reel intersest in the Passive CCDA preamplifier
would it be possible to gett the power supply
for the above project
1KdKi7LjUn4AAAAASUVORK5CYII=
Tubed CCDA I/V Amp for TDA1541(A) john.rauza@tiscali.co.uk kind reegards john
 
Status
Not open for further replies.