Hi all.
We have had the TSSA V1.7 running for 4 month in 2 amps without any issues. So it is now ready for production.
The first module can be shipped the 25. june 2014. The first batch will be of 50 modules (25 stereo sets).
On the release date there will be made an front-end ready to use the modules in bridged configuration for users with single ended sources who wants more power. This front-end will be all discrete solution - No opamps!
TSSA V1.7 will be priced at :
1 - 3 modules 100€/module.
4 - 10 modules 90€/module.
Add shipping to this price.
Key data on the module is:
1) 2x40W into 8R in SE configuration.
2) Power supply 2x32VDC - 2x35VDC
3) can be run in class AB as well as CLASS A up to 1 - 2 amp depending on heatsink used.
4) Bandwidth of 1.3MHz.
5) Two layer board gold-plated with 70um copper.
6) 2x 250Watt mosfet
7) Ultra stable offset of +/-1mV drift without the use of Servo
8) We have added LC filter on the supply to reject ripple noise from SMPS. The LC filter reduces the cross-talk between the modules across the powersupply. Because of the integrated LC filter the amp is very forgiven on the quality of the power supply.
9) Output impedance is below 50mOhm.
The Main difference on the TSSA V1.6 and TSSA V1.7 is the more "advanced" current generators which makes it possible to raise the gain by 15 times.
For those who knows the TSSA V1.6 the upgrade will mean even more detail especially in the mids and high, better nuance in the bass region. Darker background.
Some of my danish customers says it is the best they have heard.
Better than Gamut D200I, Pass Labs XA30, Belles SA-100.
We have had the TSSA V1.7 running for 4 month in 2 amps without any issues. So it is now ready for production.
The first module can be shipped the 25. june 2014. The first batch will be of 50 modules (25 stereo sets).
On the release date there will be made an front-end ready to use the modules in bridged configuration for users with single ended sources who wants more power. This front-end will be all discrete solution - No opamps!
TSSA V1.7 will be priced at :
1 - 3 modules 100€/module.
4 - 10 modules 90€/module.
Add shipping to this price.
Key data on the module is:
1) 2x40W into 8R in SE configuration.
2) Power supply 2x32VDC - 2x35VDC
3) can be run in class AB as well as CLASS A up to 1 - 2 amp depending on heatsink used.
4) Bandwidth of 1.3MHz.
5) Two layer board gold-plated with 70um copper.
6) 2x 250Watt mosfet
7) Ultra stable offset of +/-1mV drift without the use of Servo
8) We have added LC filter on the supply to reject ripple noise from SMPS. The LC filter reduces the cross-talk between the modules across the powersupply. Because of the integrated LC filter the amp is very forgiven on the quality of the power supply.
9) Output impedance is below 50mOhm.
The Main difference on the TSSA V1.6 and TSSA V1.7 is the more "advanced" current generators which makes it possible to raise the gain by 15 times.
For those who knows the TSSA V1.6 the upgrade will mean even more detail especially in the mids and high, better nuance in the bass region. Darker background.
Some of my danish customers says it is the best they have heard.
Better than Gamut D200I, Pass Labs XA30, Belles SA-100.
Attachments
Some of you have asked about what power supply i use:
I use Farnell multicomp mcfe500-25 for low mechanical hum together with the module shown here. Is has fast recovery diodes and 60.000uF long life low impedance capacitor from BHC aerovox. You do not get better capacitor than them (except RIFA/KEMET)
I will calculate a price for this module
I use Farnell multicomp mcfe500-25 for low mechanical hum together with the module shown here. Is has fast recovery diodes and 60.000uF long life low impedance capacitor from BHC aerovox. You do not get better capacitor than them (except RIFA/KEMET)
I will calculate a price for this module
Attachments
CAPBANK BARE PCB costs 13€ + shipping.
CAPBANK complete assemblied : 137€ + shipping.
CAPBANK complete unassemblied : 111€ + shipping.
The diodes used in the single bridge configuration is: FAIRCHILD SEMICONDUCTOR - FFP30S60STU - DIODE, RECTIFIER, 600V, 30A Softrecovery for minimum switching noise.
CAPBANK complete assemblied : 137€ + shipping.
CAPBANK complete unassemblied : 111€ + shipping.
The diodes used in the single bridge configuration is: FAIRCHILD SEMICONDUCTOR - FFP30S60STU - DIODE, RECTIFIER, 600V, 30A Softrecovery for minimum switching noise.
The singleended to bridge configuration module based on my Diamond frontend with jfet will cost 60 - 70€/channel and can be used with any amp you wish to bridge.
As said it is completely discrete buildup.
As said it is completely discrete buildup.
Wow - looks really interesting. Your design came to my knowledge only a couple of days ago when I accidently strolled the frontpage of diyaudio... Sounds very promising indeed. Keep it up. All the best, Per
So you live on Bornholm . If you pass Odense some time you Can listen to them.
A friend of mine (Michael G on http://www.hifigalleri.dk ) says it is the most silent AMP he come across.
Sent from my iPhone using Tapatalk
A friend of mine (Michael G on http://www.hifigalleri.dk ) says it is the most silent AMP he come across.
Sent from my iPhone using Tapatalk
Be carefull what you are asking for. I have hold back on it as i think people in here would find it too expensive.
Component count is going to 2 - 3 fold.
Component count is going to 2 - 3 fold.
Ill be happy to enjoy this for a while.🙂 I do not need the mosfets, BTW, as I have the extras i bought from you.
These are fine measurements Sonny!
One question though. Is it possible to run the amp at 27 to 28 Volts? Would be any drawbacks? The speakers are 4 ohm.
One question though. Is it possible to run the amp at 27 to 28 Volts? Would be any drawbacks? The speakers are 4 ohm.
Only reason this amp is not blowing up is that you are not as good a salesman as Lazy Cat. It trounces that amp, IMO, of course.
And George, the new one is better by a big margin.
Is not just something you try hard to hear, it is really better by the first tones....
Is not just something you try hard to hear, it is really better by the first tones....
- Home
- Vendor's Bazaar
- TSSA V1.7 mosfet Current feedback amp module