Trying to build a lamp bulb tester but been around every store possible in Helsinki area (and north of Helsinki) and don’t find anything else than LED lamps
Is it possible to buy a flood light (that usually see in construction) with either 80, 250 or 500w tubes? Those are incadecent bulbs i think right ?
Is it possible to get higher wattage bulb by serie connect say 2x80w to 160w?
What does the Pro’s say here?!
Is it possible to buy a flood light (that usually see in construction) with either 80, 250 or 500w tubes? Those are incadecent bulbs i think right ?
Is it possible to get higher wattage bulb by serie connect say 2x80w to 160w?
What does the Pro’s say here?!
I use something similar to this one:
I know there have been lots of bans of incandescent lamps in recent times, but not sure what your local regulations are.
I know there have been lots of bans of incandescent lamps in recent times, but not sure what your local regulations are.
https://www.finnparttia.fi/epages/f.../2014102905/Categories/Lamput/Hehkulamput/E27
100W should be enough?
100W should be enough?
Tuoteryhmät .. Lamput .. Hehkulamput .. E27 .. HL100 kirkas hehkulamppu
HL100 kirkas hehkulamppu
Hehkulamppu kirkas lasi 100 W E27 230 V. Värilämpötila 2900K. 60x105 mm
Tuotenro: HL100
Arvioi tämä tuote ensimmäisenä
Varastossa: Toimitusaika normaalisti 1-3 arkipäivää
Isommat erät 0,78 €
0,88 €
It's Greek to me, but looks like a 100 Watt filament incandescent for a dollar.
What wattage would be good if im working on everything from 25w amps up to 500w amps?
What result do i see if i have wrong lamp? I got hold of one 100w now. But would like to get a small stock of different ones
What result do i see if i have wrong lamp? I got hold of one 100w now. But would like to get a small stock of different ones
One of these days cleaning my garage & workshop I've tossed many incandescent lamps which were replaced some time ago by led ones, but kept two 100W for repair purposes.
I did not try halogen tube lamps for DBT, but it should work. The point is limiting current and those indeed have a filaments with resistance.
I did not try halogen tube lamps for DBT, but it should work. The point is limiting current and those indeed have a filaments with resistance.
I now got a bunch of bulbs. 60 and 100w. Is it possible to connect them in series? Say 100+100w and get a 200w lbt?
