Can any one tell me the distance for a transformer should be located from a horn tweeter?
I'm using :Selenium HM17-25 1" Bi-Radial Horn 60x40 1-3/8"-18 TPI | Parts-Express.com
and Goldwood GT-400CD Bullet Piezo Horn Driver | Parts-Express.com with a +/- 50vdc toroid transformer. I was going to place it with 1" gap from each other
I'm using :Selenium HM17-25 1" Bi-Radial Horn 60x40 1-3/8"-18 TPI | Parts-Express.com
and Goldwood GT-400CD Bullet Piezo Horn Driver | Parts-Express.com with a +/- 50vdc toroid transformer. I was going to place it with 1" gap from each other
........ I was going to place it with 1" gap from each other
have you changed your mind?Yes I was going to locate the transformer in the bottom of the tower speaker,
Was 1", now in the bottom of.
What is the maximum current flowing from the smoothing capacitors?
What is the resistance of the cables connecting the smoothing capacitance to the amplifier?
Now calculate the maximum voltage drop between the smoothing capacitors and the amplifier.
Is there decoupling fitted to the amplifier to meet transient current demand?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- Transformer Distance?