Totem Sttaf DiY

[prospero21]

Hi! I have a pair of Staff, but I'll like to make clones of Mite.
On the Polish forum, a lot of pictures come from my website.

My website

But the problem I have, it's that I can't find the driver in 4ohms. I can only find the 8ohms model. Since I can't translate Polish, I wonder if anyone can tell me if they modify the crossover to make this work with the 8ohms driver!?

Thank you.

If you have any questions aboit the Staff, I can help you.

The GDN 13/40/2 in 4 Ohm is also on their site ( http://www.protonsil.pl/index.php ). If you send an email to their sales-department, they will send you a price-quote including shipping.

 

[domlaberge]

Thanks, but I already know that Tonsil have this driver, but here in Canada, ( or North America), I'm not able to find one.

This shipping costs are probably too high...

 

[sts9]

But the problem I have, it's that I can't find the driver in 4ohms. I can only find the 8ohms model.

http://protonsil.pl/index.php?s=1&page=1&k=68&cid=71

I wonder if anyone can tell me if they modify the crossover to make this work with the 8ohms driver!?

For sure

If you have any questions aboit the Staff, I can help you.

I have questions about:
- internal box volume,
- bassreflex port lenght
- crossover plans
- driver impedance

Thanks,
Stan

 

[domlaberge]

Hi sts9,
By memory, the tweeter and the woofer are 8ohms on the Staff. TotemAcoustic want that there speaker to be less difficult to drive.

for your others questions, I'll have to reopen my box and take some picture. The last time I opened it up, I didn't have a digital camera.

 

[sts9]

Hi sts9,
By memory, the tweeter and the woofer are 8ohms on the Staff. TotemAcoustic want that there speaker to be less difficult to drive.

Thanks for answer.

for your others questions, I'll have to reopen my box and take some picture. The last time I opened it up, I didn't have a digital camera.

I will be grateful! 🙂

 

[JACKDEMERS]

TOTEM STTAF DIY

hI DOM, I KNOW WERE TO FIND DRIVERS OF STTAFS.......IN CANADA.

 

[domlaberge]

Where?! héhé

I know that Access Electronique have the Tonsils, but I can only find the 8ohms version. I need the 4ohms version for the mite. Can you help me?!

Thanks

 

[Lipaso]

Something new in this topic? I'm looking crossover schema and size of bassreflex pipe. Do You have some informations about it? For all informations I'll be very gratefull.

regards

 

[kuzyn55]

Totem Sttaf

I would like to refresh this topic.
Does anybody have any informations about Sttaf? I will be very grateful for information about box or crossover.
Regards
Chris

 

[MJPAudio]

Any more details about the staff? Pictures of the cabinet? Thank you!

 

[ross57]

Hi all,
any news? I am from Italy and would be very interested in this diy project (Totem Sttaf clone). I have got a pair of italian Opera Duetto which seem to use those drivers. Thanls

 

[dottdecibel]

Ueilà! Un compatriota........ made in italy for ever....... By Alessandro da Civitavecchia!

 

[ross57]

Ueilà! Un compatriota........ made in italy for ever....... By Alessandro da Civitavecchia!

Saluti da Napoli!