Top for tap

[epa]

stan.
you need to find out what paper size(type) your copy shop can print.
for instance in europe we use A0,A1,A2,A3,A4 ect.
whe need minimum of 30"*30" but beter is 35"*43"
u only need 1 print .
the rest is straight lines wich can be measured.

 

[olsound]

Ok l will work on it

 

[olsound]

Yes they print 35''*43'' also A0-A4

 

[epa]

ok thats good.

 

[epa]

behold of the toptap.

i got 3 different type of print files for the copy shop .
i put a line on it with measurement so you can check if its a 1 on 1 copy.
all pannels 12 mm except pannel 1 and 2 are 18 mm.
http://seijs22.home.xs4all.nl/toptap print-Model.dwfx
http://seijs22.home.xs4all.nl/toptap print.dwg
http://seijs22.home.xs4all.nl/toptap print.dwl
and full size httphttp://seijs22.home.xs4all.nl/toptap print-Model full size.dwfx://

🙂

 

[olsound]

Thanks a lot erik
The carpenter went away for fews day so when he return I wil show him all the plans
How much sheet of ply to make the top

 

[olsound]

So with the size of the print I can put the paper on the plywood and copy the plan to the plywood

 

[olsound]

can open up the files on my computer

 

[olsound]

sorry for all the bad english
I can't open the files on my computer

 

[epa]

you are using xp?
you can view with xps viewer.
you need to download .net framework 3.0
see if your print shop can open them.


its probably a lot easyer for the carpenter , if you make a print of the sub to,so he can check 1 on 1 if pannels and corners are correct.

 

[olsound]

you are using xp?
you can view with xps viewer.
you need to download .net framework 3.0
see if your print shop can open them.


its probably a lot easyer for the carpenter , if you make a print of the sub to,so he can check 1 on 1 if pannels and corners are correct.

I am using windows 7

I wil not get to the print shop this weekend, I am working this weekend but i will call the print shop and ask what type of file can they print.

 

[epa]

have u tryed open with "xps viewer"?
i use win 7 also,it opens with xps viewer.

 

[olsound]

No I did not try xps viewer
I will try it later

 

[epa]

u use behringer dcx2496 processor?
use the settings as in example page 22 in the manual.
use 18db butt. @100hz or 24 db lr for low/mid x-over,and 18 db butt 1000 hz mid/high to start with.
use auto align function first to get you started.

 

[olsound]

u use behringer dcx2496 processor?
use the settings as in example page 22 in the manual.
use 18db butt. @100hz or 24 db lr for low/mid x-over,and 18 db butt 1000 hz mid/high to start with.
use auto align function first to get you started.

Yes I use the dcx2496 processor.

 

[CCU]

Looking forward to seeing some real world measurements 🙂

 

[olsound]

Looking forward to seeing some real world measurements 🙂

Thanks, waiting on the carpenter to return to get a price for the cabs to be build

 

[CRESCENDO]

Did this top ever get built?

Hi Erik - I'm lookin for a really nice and beautiful sounding diy top. I searched your name and found this thread. Hope all is well, guys & gals!

 

[olsound]

Did this top ever get built?

Hi Erik - I'm lookin for a really nice and beautiful sounding diy top. I searched your name and found this thread. Hope all is well, guys & gals![/QUOTE


Money trouble😡

 

[epa]

money is a bitch sometimes🙁

so were designing something else with what we have atm being a selenium 15sws800 and a celestion bx12" 4805 🙂
the selenium wil cover ~80>~300 hz and the celestion above it.
i got this sofar