Just a little food for thought on a potential use for these amps: using both of the GFA-7400 gives you 10 channels of amplification. This would be really great paired up with the MiniDSP Flex Eight or the soon to be released FLEX HT. Because of the high input impedance for each amp channel you can directly connect the same Fled output channel to 2 of the amp inputs without an issue.
That setup would be amazing for an active 4-way tower speaker with two woofers, e.g. WWMTM or WWMMT, etc.
That setup would be amazing for an active 4-way tower speaker with two woofers, e.g. WWMTM or WWMMT, etc.
bump
Also, another easy way to get 10 channels of analog audio out is with a Behringer UMC1820. You could do DSP under Linux on the computer and use the USB UMC1820 to send 10 channels of audio to the pair of GFA-7400.
Also, another easy way to get 10 channels of analog audio out is with a Behringer UMC1820. You could do DSP under Linux on the computer and use the USB UMC1820 to send 10 channels of audio to the pair of GFA-7400.
I can offer a package deal of both amps plus a Behringer UMC1820 interface for a total of $800 plus shipping from 48864. That's $300 per amp plus only $200 for the UMC1820. I have been using the Behringer interface for computer DSP and it works great. You would be buying a 10 channel active system with DSP capabilities. Aweseome for a pair of floostanding speakers or mains plus subs.
If only shipping wasn't such an obstacle.
I'd be trying to use them [ both amps] for an ecellent Home Theatre set-up
I'd be trying to use them [ both amps] for an ecellent Home Theatre set-up
That's right, it is a very flexible setup for all sorts of active speaker projects. I just upgraded to some nCORE amps so I no longer am using this gear myself.
anyone?
10 channels of amplification (two Adcom GFA-7400 amps) plus a 10-channel USB audio interface - just add a computer and some free software and you are set.
$800 for everything plus shipping from Michigan.
10 channels of amplification (two Adcom GFA-7400 amps) plus a 10-channel USB audio interface - just add a computer and some free software and you are set.
$800 for everything plus shipping from Michigan.
Just registered to reach out to see if these are still available. New account can't start new convos, please reach out.