Sorry, I figured most would want to upgrade the arms and pick their own cartridges. There are 2 single motor units- they have cartridges and work fine. The two motor table runs a little slow and needs a new belt. I also was playing with the stop screws on the bearing and now it doesn't want to track right. So the stop screws just need to be adjusted to make it right on the 2 motor. Other than that one headshell has totally stripped and one dustcover has a few small cracks in the corners, they are great. There are however 4 headshells and I can get 3 to work properly even though one is a little rough. 2 cherry headshells for sure though!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.