• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Three AR XA turntables

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Here I have 3 AR XAs for sale. Looking to get $350 for all 3. Email me with any questions or proposals/trades. I am looking for a good DAC or Quad II amplifier. Also looking for Audio Electronic Supply gear.
 

Attachments

  • 101_0097.jpg
    101_0097.jpg
    947.1 KB · Views: 195
  • 101_0094.jpg
    101_0094.jpg
    993.1 KB · Views: 184
  • 101_0095.jpg
    101_0095.jpg
    1 MB · Views: 149
  • 101_0096.jpg
    101_0096.jpg
    779.3 KB · Views: 132
  • 101_0092.jpg
    101_0092.jpg
    562.4 KB · Views: 135
  • 101_0090.jpg
    101_0090.jpg
    576.3 KB · Views: 54
Do they all work - have cartridges etc? Not a lot of detail here.

Sorry, I figured most would want to upgrade the arms and pick their own cartridges. There are 2 single motor units- they have cartridges and work fine. The two motor table runs a little slow and needs a new belt. I also was playing with the stop screws on the bearing and now it doesn't want to track right. So the stop screws just need to be adjusted to make it right on the 2 motor. Other than that one headshell has totally stripped and one dustcover has a few small cracks in the corners, they are great. There are however 4 headshells and I can get 3 to work properly even though one is a little rough. 2 cherry headshells for sure though!
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.