"The Wire AMP" Class A/AB Power Amplifier based on the LME49830 with Lateral Mosfets

Jump to Latest
#1,382
AndrewT said:
Post1 sch shows the Drains connected to the output.
Have the D & S labels been swapped?
Click to expand...

Here is a resized copy of the final circuit (I don't remember what post it was on). It shows the sources connected to the outputs, as they should be.
 

Attachments

  • LME AMP SCHEMATIC[1].png
    LME AMP SCHEMATIC[1].png
    139.5 KB · Views: 447
#1,387
The mistake in post 1 was picked up in Post #53 by Anthony Holton and corrected shortly after.

The schematic I'm using is the one posted with the build guide which is in this post by opc. I would have thought anyone building this amp would have been searching out the build guide and found the schematic at the same time... perhaps if opc is updating the first post he could put both of these there. I believe there was also an updated worksheet.
 
#1,389
hochopeper said:
The mistake in post 1 was picked up in Post #53 by Anthony Holton and corrected shortly after.

The schematic I'm using is the one posted with the build guide which is in this post by opc. I would have thought anyone building this amp would have been searching out the build guide and found the schematic at the same time... perhaps if opc is updating the first post he could put both of these there. I believe there was also an updated worksheet.
Click to expand...

Perheps OPC can edit the first post with a link to the build guide and definitive schema.

Gr GJ
 
#1,390
Opc can add an index to the first post.
That index can include a list of post links to relevant updates and/or revised schematics and/or build information.

With the help of the Moderators, the whole post could be replaced with all it's pics and other attachments.
 
#1,391
Hi Guys,

I updated the very first post with a link to the correct schematic and assembly guide. I cannot update the attachments, but as mentioned above if a moderator wants to give me update permissions for them, then I can update the attachments with the correct ones.

Along the same lines, I've finally packed up the last of the mosfet only orders and have a real official "final offerings" list which are all the items I have left that I'm not keeping for myself:

2 complete stereo pairs of The Wire power amp kits - include PCB and all parts.

$160 per pair, sold in pairs, or all four together only. No singles.

12 x LME49830 Driver IC's for The Wire power amp.

$6 each


If anyone is interested in the above kits or parts, simply post up here and it'll be first come first serve.

Cheers,
Owen
 

Attachments

  • IMG_7506.JPG
    IMG_7506.JPG
    124.7 KB · Views: 421
#1,395
Cool! Done and done...

neb001 and AKN:

I haven't shipped your mosfet orders out yet, so I'll just conjoin your respective orders to save on shipping.

AKN's order won't impact his shipping charges at all, so I'll just send a payment request for $24, and neb001 will require a box for the kits which will require a little more money for shipping. I'll send you both totals via PM.

kiwik:

I'll your pair up, and get you a total with shipping. Expect a PM in a few minutes.

All that remains are 8 x LME49830.

Cheers,
Owen
 
#1,397
Opc,
type out a full and new version of post1, with all it's attachments etc. Send it to the Moderators and they will arrange for the new version to replace the existing version.
If that sounds like too much work then we'll settle for the periodic updates as you have done so far.
 
#1,398
Opc, i'll take one of the LME to come with the mosfets please mate. i'll shoot you an email about details. HYPERTUNE promptly vanished again, giving him till the end of the week. so if you are reading Mark, please get in touch!! i'll cover payment once we have a final number, all to come with the NTD1 PCBs, we are in no hurry and it will save shipping and effort for everyone
 
You must log in or register to reply here.
Top Bottom