The Well Tempered Master Clock - Group buy

[Emi90]

- andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 2 x SC-Cut 5.6448 MHz + 2 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 2x SC-Cut 11.2896 + 2x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL

 

[flowerpot]

- andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 2 x SC-Cut 5.6448 MHz + 2 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 2x SC-Cut 11.2896 + 2x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB

 

[andrea_mori]

GB update

Since we are close to reach the MOQ for some frequencies I will start soon to collect orders to finalize the GB.

Crystals frequency close to the MOQ are:
- 5.6448 MHz SC-cut 3rd overtone HC-47/U package 15 pcs
- 6.144 MHz SC-cut 3rd overtone HC-47/U package 15 pcs
- 45.1584 MHz SC-cut 3rd overtone HC-43/U package 10 pcs
- 49.152 MHz SC-cut 3rd overtone HC-43/U package 10 pcs

For other frequencies we have to wait until the MOQ will be reached.

Some notes about this GB.

5.6448 MHz and 6.144 MHz SC-cut 3rd overtone HC-47/U package:
- you can implement these in your own oscillator by yourself
- you can use the TWTMC-D board without oven
- you can use the TWTMC-D board with the TWTMC-OVN tweaking the board and the copper tube to accept the different package HC-47/U
- you can wait for a new Driscoll specific design that I will use in the discrete DAC I'm working on

I'm also working on a light version of the discrete DAC that will use a new dual Pierce oscillator board with AT-cut crystals at 22.5792 MHz and 24.576 MHz.
If you are interested please add yourself to the list for the Laptech AT-Cut fundamental HC-43/U 22.5792 MHz and 24.576 MHz.

 

[merlin el mago]

@andrea YHPM

 

[spm]

andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 2 x SC-Cut 5.6448 MHz + 2 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 2x SC-Cut 11.2896 + 2x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC

 

[palmito]

andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 2 x SC-Cut 5.6448 MHz + 2 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 2x SC-Cut 11.2896 + 2x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz

 

[fralippo]

andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 2x SC-Cut 11.2896 + 2x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz

 

[andrea_mori]

Crystals in stock

I have just known that the following crystals are in stock at Laptech, so there is no MOQ:

Part No. Frequency Cut Holder Quantity
XT4272 5,644800 AT HC43 8
XT4340 6,144000 AT HC43 8
XT4333 16,934400 AT HC43 7
XT4273 22,579200 AT HC43 11
XT4334 25,000000 AT HC43 10
XT4276 49,152000 AT HC43 5
XT4277 90,316800 AT HC43 15

XT4335 11,289600 SC HC43 8
XT4336 22,579200 SC HC43 25
XT4337 24,576000 SC HC43 36
XT4338 45,158400 SC HC43 25
XT4339 49,152000 SC HC43 12

 

[hidjedewitje]

Join Date: Jan 2006
Location: Italy
andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz

 

[Baka]

Added myself to the end.

andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Baka: 1 x AT-Cut 22,579200 MHz

 

[andrea_mori]

@hidjedewitje

there is no stock for AT 11.2896MHz

 

[diyiggy]

May you please enlight me : does the Discroll board is the best ALSO for AT Cuts <= 22.579&24.579 Mhz or Pierce is better suited for those ATs Cut sampling rate?



andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
-Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Baka: 1 x AT-Cut 22,579200 MHz
-diyiggy 1x SC-Cut 5.6448 MHz + 1xTWTMC-D +3 TWTMC-P (single XO board)

 

[andrea_mori]

May you please enlight me : does the Discroll board is the best ALSO for AT Cuts <= 22.579&24.579 Mhz or Pierce is better suited for those ATs Cut sampling rate?

For my taste and my listening impressions the Driscoll is superior for AT also.
No way to measure them at now, I hope soon...

 

[fralippo]

- andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 22.5792 MHz + 1 x SC-Cut 24.5760 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Baka: 1 x AT-Cut 22,579200 MHz
- diyiggy 1x SC-Cut 5.6448 MHz + 1xTWTMC-D +3 TWTMC-P (single XO board)

 

[diyiggy]

thank you Andrea Mori for your answer, so I change a little my line.


- andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 22.5792 MHz + 1 x SC-Cut 24.5760 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Baka: 1 x AT-Cut 22,579200 MHz
- diyiggy 1x SC-Cut 5.6448 MHz + 4xTWTMC-D

 

[gabor80]

Updated my order:



- andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 22.5792 MHz + 1 x SC-Cut 24.5760 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 2 x TWTMC-D + 2x TWTMC-OVN
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Baka: 1 x AT-Cut 22,579200 MHz
- diyiggy 1x SC-Cut 5.6448 MHz + 4xTWTMC-D

 

[diyiggy]

@ Gabor

Hi,

My understanding is the SCs at 5.6448 & 6.144 MHz don't need the oven (mandatory for the upper sampling rates) with the Discroll oscillator board.

Am I wrong or does it sound better with the oven board than without ?

 

[QSerraTico_Tico]

added 1x SC-cut 11.2896MHz

- andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 22.5792 MHz + 1 x SC-Cut 24.5760 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 2 x TWTMC-D + 2x TWTMC-OVN
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x AT-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Baka: 1 x AT-Cut 22,579200 MHz
- diyiggy 1x SC-Cut 5.6448 MHz + 4xTWTMC-D
- QSerraTico_Tico 1x SC-cut 11.2896MHz

 

[andrea_mori]

@ Gabor

Hi,

My understanding is the SCs at 5.6448 & 6.144 MHz don't need the oven (mandatory for the upper sampling rates) with the Discroll oscillator board.

Am I wrong or does it sound better with the oven board than without ?

Difficult to say without testing. BTW, keep in mind I'm developing a specific board for these jewels, a more sophisticated Driscoll oscillator with a different squarer, and maybe battery powered.
Of course, I need the crystals to test the new board, so it will be available after.

 

[hidjedewitje]

@hidjedewitje

there is no stock for AT 11.2896MHz

My bad! I changed it to the wrong crystal cut. I fixed it now

- andrea_mori: 3 x SC-Cut 5.6448 MHz + 3 x SC-Cut 6.144 MHz
- fralippo: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 22.5792 MHz + 1 x SC-Cut 24.5760 MHz
- gentlevoice: 1* SC-cut 6.144 MHz
- gabor80: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 2 x TWTMC-D + 2x TWTMC-OVN
- lindamar: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- cps3113: 1 x SC-Cut 6.144 MHz
- triodehunter: 1 x SC-cut 5.6448 MHz
- BDL: 1 x SC-Cut 5.6448 MHz
- wealas: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 11.2896 MHz + 1 x SC-Cut 12.288 MHz
- hidjedewitje: 4x SC-Cut 11.2896 +2x colpits-clap pcb
- cerole: 2 x SC-Cut 45.1584 MHz + 2 x SC-Cut 49.1520 MHz, 4xTWTMC-DIL, 4X TWTMC-D, 4X TWTMC-OVN
- Kazuo Ozawa: 2X SC-Cut 49.1520 MHz + 2X TWTMC-D + 2X TWTMC-OVN
- Hellokitty123: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN
+ 2 x TWTMC-DIL
- euro21: 1X SC-Cut 45.1584 MHz, 1X SC-Cut 49.1520 MHz, 2X TWTMC-D PCB, 2X TWTMC- OVN PCB
- canvas : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Emi90: 1 x SC-Cut 5.6448 MHz,1 x SC-Cut 6.144 MHz, 2 x TWTMC-D, 2x TWTMC-OVN, 1 x TWTMC-D&D, 2 x TWTMC-DIL
- flowerpot: 2 X SC Cut 49.1520 MHz, 2X TWTMC-D PCB
- spm 1x 5.6448 SC + 1x 6.144 SC
- palmito: 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz
- Baka: 1 x AT-Cut 22,579200 MHz
- diyiggy 1x SC-Cut 5.6448 MHz + 4xTWTMC-D
- QSerraTico_Tico 1x SC-cut 11.2896MHz