• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

The Well Tempered Master Clock - Group buy

Jump to Latest
#349
@ Ilgavro : I think you have perhaps not to wait a next one if what you're looking for is in that range : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN+ 2 x TWTMC-DIL


This is what HelloPitty123 ordered and do not paid to AndreMori. One may jump on it as there is more than one year before two GB shippment.


@Andrea: any PP insurance or signalment to block the PP account of this guy ?
 
Last edited:
#351
Available crystals

hellokitty123's order has been canceled, 45 and 49 MHz crystals have been sold but 5.6448 Mhz and 6.144 Mhz Sc-cut 3rd overtone HC-47/U are available (1 for each frequency).

If someone was interested on this pair of crystals, please send me the filled order form.
 
#352
These 2 frequencies left may interrest Wlowes (if not using ovrsampling) member with a DIL12 adaptator of your to stack a discroll board directly on the iancanada fifopi board (halas my understanding there is no room to adapt two DIL12 adaptator as on the fifo Pi the clock areas were 180° flipped.


Anyway if like me you mostly listen 5.6448 MHz multiple, it's not of an importance to also use a Laptech on the 6.144 MHz area. While you can use both but whith no direct stacking, i.e. use the uf-l adaptator boards with short 2" uf-l wires as jitter is of a less importance with old PCM chips (instead delta-sigma dac chips)
 
#353
I was tempted. I was lucky to get the 45/49 pair. I suspect the 5/6 pair would be perfect for the TDA1541a rig I run, but I wanted to ultimately have a system that will play anything. I am enjoying a tda1541a that occasionally plays 96, 192k or DSD64. 99% of my listening is at redbook speed.
Now I have to get up to speed with this thread and figure out how to use it with Iancanada FIFOPi. If anyone has taken that path, let me know. Much fun ahead.
 
#354
@Wolwes

I understand now, I believed it was Ilgavro member who got these 45/49 Mhz.


My understanding is the discroll board to come is a double clock one, not stackable on the Fifoboard, but standalone clock Discrol previous board seems ok for stacking (but only one pad, no room for the two areas of the FifoPi).
You can also use the Dil-12 to uf-l adaptator to link with a 2" uf-l wire to the new double Discrol adapatator
 
#359
Crystals data

Crystals are on the way, I will ship next week.
 

Attachments

You must log in or register to reply here.
Top Bottom