The Pass Pub: The High-End Off Topic Thread

[Cal Weldon]

The one that stymies me is a tweeter outline that has rounded sides and flat top & bottom.

You make a solid jig for that.

 

[grataku]

just to show off, as usual

soon to be finished, small Tann boxes for Living Room, to take place of Absolute WAF OB

some wax on veneer, to finish hefty xovers and to put that fluffy white stuff in...

though, it'll wait a little, not overly in mood for dragging them around

ZM,
If you have some sand paper and varnish left over from your beautiful cabinet endeavors maybe you could refinish that parquet.😀😉

 

[Zen Mod]

parquet is old......... it'll get new layer on top.... of something 🙂

however, that's last hole on my flute

 

[noelectrix]

parquet is old......... it'll get new layer on top....

noo, keep the old! : )

remember Henry Rollins:" I look at the bottom and what do i see, i see the bottom looking at me"

 

[esprit]

old parquet and Tannoy is good

 

[Cal Weldon]

I agree. Elbow grease it's what's needed. That's a very nice looking floor.

 

[stajo]

Keep the fishbone massa. Your flute is full of holes

 

[Zen Mod]

funny Stajodude

had some Sea time lately, or just clicking da mouse?

 

[b4bz]

Way to go Mr Pass! Based on your excitement during a recent interview with Guttenberg over the Heil AMTs available from ESS, I sprung for a pair of the Mediums. Now I need to find a good set of open baffle woofers and an open baffle design. I assume this will match well with two F5 amps per channel. The fun begins! Suggestions welcome!

 

[Zen Mod]

think big

 

[b4bz]

Hi Zen, here's my first large prototype for the bass drivers. Gets down to 1 HZ. Heil AMTs on the lower right. My dear wife didn't want them in the living room though. Open to more suggestions.

 

[cyclotronguy]

needs tube amp

Traditionally powered with a 1940's vintage 400kW RCA triode

 

[Soundhappy]

Way to go Mr Pass! Based on your excitement during a recent interview with Guttenberg over the Heil AMTs available from ESS, I sprung for a pair of the Mediums. Now I need to find a good set of open baffle woofers and an open baffle design. I assume this will match well with two F5 amps per channel. The fun begins! Suggestions welcome!

Medium with woofer open baffle ? Oh Papa DIY design are easy to build!

 

[cyclotronguy]

Nelson's slot loaded woofer / open baffle implementation is better than it has any right to be and has proven very versatile.

 

[brianco]

........... Open to more suggestions.

Get a larger house, build a dedicated - wife proof - listening room or get rid of wife if all else fails!

 

[b4bz]

Get a larger house, build a dedicated - wife proof - listening room or get rid of wife if all else fails!

Made a vow, plus, she's a keeper and a looker. 14 years and counting!

 

[brianco]

.....excellent! You are a lucky guy. [I am also banned from certain electronics in the sitting room. T'was my 'shadow' rearing its nasty head]

 

[stajo]

funny Stajodude

had some Sea time lately, or just clicking da mouse?

No seatime, still working from home. Started developing a bit of Tourettes in the isolasion.

 

[esprit]

bollocks

 

[Itsmee]

You need more practice, not quite up to Father Jack's standard 😀
YouTube