Zen Mod said:
so - you saw them in other thread 😉
(without panties ........ )
@cwayzee Lykkkkkkkk ;
any news ?
Which other thread?? I also wanna see

Lykke paid me a visit yesterday, he is now working on the other channel.
Magura 🙂
EDIT: Found it myself 🙄
Magura said:
Which other thread?? I also wanna see![]()
Lykke paid me a visit yesterday, he is now working on the other channel.
Magura 🙂
EDIT: Found it myself 🙄
in other thread where you wrote about hollow state .........

any amp with PSU on sec with less than 200V is for pooftaaaahs 😀
did you hear Drek in mono ?
Zen Mod said:
in other thread where you wrote about hollow state .........
any amp with PSU on sec with less than 200V is for pooftaaaahs 😀
did you hear Drek in mono ?
Naah, any amp drawing less than 6A per channel, is pooftah 😀
No listening session, as Lykke left the Drek at home

Magura 🙂
Magura said:
Naah, any amp drawing less than 6A per channel, is pooftah 😀
No listening session, as Lykke left the Drek at home![]()
Magura 🙂
shall we speak in Joules
(E = (U^2 x C)/2 ) .............

Lykkkkk is pooftah ...... his drek is under 200Vpp


Lykkkkk is pooftah ...... his drek is under 200Vpp![]()
![]()
It might be wrong ...

Jesper...
Attachments
lykkedk said:
It might be wrong ...Well second channel is under construction ...
Jesper...
ya certainly didn't hear it in mono ........

Zen Mod said:
shall we speak in Joules
(E = (U^2 x C)/2 ) .............
Lykkkkk is pooftah ...... his drek is under 200Vpp![]()
![]()
Do the math 40V 200.000uF 😎
Magura 🙂
Magura said:
Do the math 40V 200.000uF 😎
Magura 🙂
just 160J
and say - 3900uF/2 at 900V ?
naaahhh ........ just 789J

Magura said:Whom are you planning to electrocute with that ?![]()
Magura 🙂
naah - that was a joke ;
3900 cans will work feeding some Babushka SET drek , with pretty low voltage ( low at least for these Evos cans ) ......
electrocuting - one day when I decide that I have 'nuff time for my 211 amps
but - even then , I'll not feed them with more than 650V , because I just don't need full power ;
only in case that I decide to use PSU from 100W MW xmitters ( I have ) ...
xformers are 2KVac ,and I hope that I'll find that they're center tapped ........
😎
cviller said:I haven't been working enough on my drek - but look what my girlfriend made!!! 😀
seems that you have working enough - where is important!

cviller said:the taste
The liquorice shoelaces would give me the runs but the marzipan looks yummy, wouldn't mind sinking my teeth in some of those resistors.
(maybe CV means he ate his own boards?)
jacco vermeulen said:
(maybe CV means he ate his own boards?)
I still have some left!
😀
Big deal, the other gents should feel lucky that Scandies and Cheesos are the only ones in the world who eat that Black candy stuff that gives you vascular problems.
Bet you 50 cents he ate the donuts first, real ones.
Bet you 50 cents he ate the donuts first, real ones.

cviller said:I haven't been working enough on my drek - but look what my girlfriend made!!! 😀
Hils fruen, den kage er da for blæret 😀
Magura 🙂
- Status
- Not open for further replies.
- Home
- Amplifiers
- Pass Labs
- The Drek builder's thread