I have an SL1700 which it the semi-auto version of your 1600. You can get the SL 1700 Manual here. . I have always used a Grado MI cartridge with carbon fiber headshell. I use a machinist level on the plenth left/right-fore/aft. The feet are adjustible but ideally u you set it on a granite surface plate and adjust the shims under that. I used a Audio Tecniques protractor to set the cartridge angle. I run the balance at about 1-1/4g to 1-1/2g using the stock arm
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.