i was actually aiming for a lower voltage... more like this... buffer accumulator (3.6V)
Buferakumulators 3.6V/60mAh, 3cells - Buferakumulatori, lod?jamie - Tabletes veida akumulatori - Akumulatori - ENER?IJA - Katalogs - Argus Radiodeta?u Tirdzniec?ba
Buferakumulators 3.6V/60mAh, 3cells - Buferakumulatori, lod?jamie - Tabletes veida akumulatori - Akumulatori - ENER?IJA - Katalogs - Argus Radiodeta?u Tirdzniec?ba
That might be too low.
You need to first of all determine a suitable relay is available and design the whole circuit around that.
I think you can get 2.4 volt versions of that style of battery. Two in series would be fine.
You need to first of all determine a suitable relay is available and design the whole circuit around that.
I think you can get 2.4 volt versions of that style of battery. Two in series would be fine.
i know, but i have a limited budget
Would this one work?
https://www1.elfa.se/data1/wwwroot/assets/datasheets/zaS40_Data_E.pdf
Would this one work?
https://www1.elfa.se/data1/wwwroot/assets/datasheets/zaS40_Data_E.pdf
- Status
- Not open for further replies.