no
well, maybe the higher gain of ecc83 would be to have
my cheapskate effects are a bit noisy, and thickens the lower mids at higher level
and that is exactly what Im trying to avoid
so it seems Im still far from 'my sound'
I have ordered the new Palmer Deepressor pedal
but on backorder
well, maybe the higher gain of ecc83 would be to have
my cheapskate effects are a bit noisy, and thickens the lower mids at higher level
and that is exactly what Im trying to avoid
so it seems Im still far from 'my sound'
I have ordered the new Palmer Deepressor pedal
but on backorder
ok, I got the Aikido mono solo boards
it will be my instrument input
and I expect my two channel Burning BA-3 (NelsonPass) will look like this
this will be my output gain/buffer
now I need some power supply parts
it will be my instrument input
and I expect my two channel Burning BA-3 (NelsonPass) will look like this
this will be my output gain/buffer
now I need some power supply parts
Attachments
BA-3, a full ground plane seems to make sense here
and where a hot connection is needed, I will just route away with engraving bit
a hybrid combination of hard wire and hole mount
would be really nice to have a small tool to route around the holes
and where a hot connection is needed, I will just route away with engraving bit
a hybrid combination of hard wire and hole mount
would be really nice to have a small tool to route around the holes
Attachments
old thread, but might be worth reading
http://www.diyaudio.com/forums/tubes-valves/9862-12au7-vs-12bh7-vs-6cg7.html
http://www.diyaudio.com/forums/tubes-valves/9862-12au7-vs-12bh7-vs-6cg7.html
Do you have any bass sound you are shooting for? What have others done?
Bass Distortion - TalkBass Forums
Big, distorted bass tone - Gearslutz.com
Concerning distortion effects for bass - GeekChat!
MDI-2 Bass Distortion Review | Arion | Bass Effects | Reviews @ Ultimate-Guitar.Com
Soundblox 2 Multiwave Bass Distortion
MXR M-181 Bass Blowtorch Overdrive Distortion | Effects Bay
Bass Distortion Pedal, Bass Overdrive Pedal, Bass Guitar Distortion Pedal, Boss Bass Overdrive Pedal - ActiveMusician
Bass Distortion - TalkBass Forums
Big, distorted bass tone - Gearslutz.com
Concerning distortion effects for bass - GeekChat!
MDI-2 Bass Distortion Review | Arion | Bass Effects | Reviews @ Ultimate-Guitar.Com
Soundblox 2 Multiwave Bass Distortion
MXR M-181 Bass Blowtorch Overdrive Distortion | Effects Bay
Bass Distortion Pedal, Bass Overdrive Pedal, Bass Guitar Distortion Pedal, Boss Bass Overdrive Pedal - ActiveMusician
Do you have any bass sound you are shooting for?
clean
and natural, whatever that means
the only distortion I will accept is what makes it sound in the direction of acoustic bass
actually, right now, the only pre I have between my passive bass and power amp is a simple Bass EQ pedal switch thing
works ok
it even works in bypass mode
but it tells me that my future preamp build may be all I will ever need
that feels good, somehow
but if this speaker goes active, I will still have some means of controlling the sound
Should be relatively straight forward then.
I hope so
well, may not be that simple, it seems
part of my problem right now is distortion
its fine at low SPL
but I loose the clean sound when I play just moderately louder than low
I hope so
well, may not be that simple, it seems
part of my problem right now is distortion
its fine at low SPL
but I loose the clean sound when I play just moderately louder than low
Compression.
Compression.
wow, it works
hard to imagine playing without it now
like night and day, really
Attachments
wonder what gain will be optimal for my tube pre
ordered a few 6n6p
and then decided, why not use 6n1p in front of it
so, a few of them ordered as well
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Live Sound
- Instruments and Amps
- Switchable Hi-Z input impedance, how ?