Everything is working as expected, but i need tester's (brave one's)
Take a look... The hole camillagui is packed into .tcz...
I tried to get it all working, but must admit that I'm a bit - actually much mire than a bit ;-) - confused by all the (deprecated) repositories and instructions.
So far I have been able to get a 'working' camillagui. With CamillaDSP showing as offline though.
It's also not clear to me what to do with squeezelite. Or basically what I need to install: SuperPlayer, Gamechanger, CamillaDSP, ...?
Some instructions or guidance how to start with CamillaDSP with pCP and camillagui would be appreciated.
Using pCp 8.0 64bit on a pi 4B.
So far I have been able to get a 'working' camillagui.
Glad to hear... it was just about the camillagui.
The other repo's are deprecated, and the one with the GameChanger wasen't supposed to be "public" yet...
Thank's for repporting that the camillagui is working.
I will clean the repos, thank's
Jesper.
Not exactly an answer to my question, but thanks anyway.
Anyone else willing to share the secret sauce on how to get CamillaDSP working on pCp?
Anyone else willing to share the secret sauce on how to get CamillaDSP working on pCp?
Hey...
I'am sorry that i had my Samplerate Changer / Gamechanger on "public" making things confused 😕
As i wrote, my main goal first was to have the camillagui running, and it seems you allready are there. - Also on the pCP 64bit, which i did not try out.
I'am writing the guide up, for my SampleRate Changer/GameChanger - but i donno when i will be done.
Jesper.
I'am sorry that i had my Samplerate Changer / Gamechanger on "public" making things confused 😕
As i wrote, my main goal first was to have the camillagui running, and it seems you allready are there. - Also on the pCP 64bit, which i did not try out.
I'am writing the guide up, for my SampleRate Changer/GameChanger - but i donno when i will be done.
Jesper.
It all started a "long" time ago ;-)... (Not in a far away galaxy through)
I've been using CamillaDSP for 1+year now, having had a lot of fun & pleasure with this DSP thing.
I did a loooong writeup of my SampleRate Changer GitHub - Lykkedk/SuperPlayer-v8.0.0---SamplerateChanger-v1.0.0
It should now be possible to use it, if my howto are good enough that is 😱
I donno if it will work on piCorePlayer 64bit... Maybee someone would try ???
Jesper.
I've been using CamillaDSP for 1+year now, having had a lot of fun & pleasure with this DSP thing.
I did a loooong writeup of my SampleRate Changer GitHub - Lykkedk/SuperPlayer-v8.0.0---SamplerateChanger-v1.0.0
It should now be possible to use it, if my howto are good enough that is 😱
I donno if it will work on piCorePlayer 64bit... Maybee someone would try ???
Jesper.
My main question is rather silly though: do I need to install CamillaDSP from their repo, or is it all included in the tcz files?
You howto's are definitely helpful. Very concise actually. And they helped me a lot. But what I missed (perhaps also because I didn't read all 33 pages of this thread) is an overview. Call it the basics. Your howto's focus on specific parts of the setup. But they didn't provide the 'bigger picture' for me. I think that's in part since you still seem to be on a journey too. So it's understandable.
I am willing to see if it works on pCp 64bit. I know my way around linux. But CamillaDSP is new to me. And so far I have no clue how to integrate it into pCp in such a way that Squeezelite's output is routed through cdsp.
You howto's are definitely helpful. Very concise actually. And they helped me a lot. But what I missed (perhaps also because I didn't read all 33 pages of this thread) is an overview. Call it the basics. Your howto's focus on specific parts of the setup. But they didn't provide the 'bigger picture' for me. I think that's in part since you still seem to be on a journey too. So it's understandable.
I am willing to see if it works on pCp 64bit. I know my way around linux. But CamillaDSP is new to me. And so far I have no clue how to integrate it into pCp in such a way that Squeezelite's output is routed through cdsp.
My main question is rather silly though: do I need to install CamillaDSP from their repo, or is it all included in the tcz files?
Yes... it is ::
Code:
SuperPlayer-GameChanger.tcz
camilladsp-0.6.3.tcz
py3.8-six-1.16.0.tcz
py3.8-websocket-client-1.2.1.tcz
superplayer-alsa_cdsp-v8.0.0.tcz
superplayer-alsa_cdsp-v8.0.0.tcz.dep
superplayer-samplerate-v8.0.0.tcz
superplayer-samplerate-v8.0.0.tcz.dep
They are all included... The camilladsp is version 0.6.3, and i can easily update when time comes.
Yes you are right i mainly concentrate about the use of auto samplerate change.
But the way camilladsp & squeezelite are working as a unit for this is
sort of another story.
They can be played together different way's. The way it's used in my setup is this way ::
squeezelite --> piped to stdout ---> stdin @ camilladsp --> sound_out (hw0,0)
Jesper.
Last edited:
Problems running camillagui.tcz
Hi
So I have followed the instructions here, GitHub - Lykkedk/SuperPlayer-v8.0.0--CamillaGUI-v0.6.0: SuperPlayer-CamillaGUI .tcz extensions the right way of doing it, to get CamillaGUI running on my PiCorePlayer device (RPi 3b with JustBoom DAC), but I am getting a 404 not found when browsing to /gui/index.html on port 5000. Any ideas what I have done wrong?
Are there any logs I can use to diagnose the problem.
Hi
So I have followed the instructions here, GitHub - Lykkedk/SuperPlayer-v8.0.0--CamillaGUI-v0.6.0: SuperPlayer-CamillaGUI .tcz extensions the right way of doing it, to get CamillaGUI running on my PiCorePlayer device (RPi 3b with JustBoom DAC), but I am getting a 404 not found when browsing to /gui/index.html on port 5000. Any ideas what I have done wrong?
Are there any logs I can use to diagnose the problem.
Hi.
Did you try to :
"ps aux" on the terminal?
There should be some lines indicating
that camillagui is running.
Jesper.
Did you try to :
"ps aux" on the terminal?
There should be some lines indicating
that camillagui is running.
Jesper.
Hi bobcoup
You can also do this :
Then i got this output
This line
tells that the camillagui is running the main.py located in the right location...
Jesper.
You can also do this :
Code:
ps aux | grep camillagui
Then i got this output
Code:
tc@SuperPlayer:~$ ps aux | grep camillagui
8292 root 0:00 {camillagui} /bin/sh /usr/local/bin/camillagui
8293 tc 0:01 python3.8 /mnt/mmcblk0p2/tce/Camilla_Extensions/camillagui/main.py
8344 tc 0:00 grep camillagui
This line
Code:
python3.8 /mnt/mmcblk0p2/tce/Camilla_Extensions/camillagui/main.py
Jesper.
Hi here...
This thread is thank's to @TNT is also about the use of an remotecontroller (BLE / Bluetooth Low Energy)
I did have a lot of fun inventing this one.
If there are some interest, let me know.
A little "flashy" video of the use 😉 SuperPlayer Remote Box - YouTube
Good weekend out there!
Jesper.
This thread is thank's to @TNT is also about the use of an remotecontroller (BLE / Bluetooth Low Energy)
I did have a lot of fun inventing this one.
If there are some interest, let me know.
A little "flashy" video of the use 😉 SuperPlayer Remote Box - YouTube
Good weekend out there!
Jesper.
Attachments
HI!
Can anyone do a video for dummies as tell step by step what to do after inserting the microSD with pCP from the first time into the RPI.
Regards
Stig Erik
Can anyone do a video for dummies as tell step by step what to do after inserting the microSD with pCP from the first time into the RPI.
Regards
Stig Erik
Hi there...
I think they're docs are pretty good, have
a look ::
https://docs.picoreplayer.org/
Jesper.
I think they're docs are pretty good, have
a look ::
https://docs.picoreplayer.org/
Jesper.
Hi Jesper!Hi there...
I think they're docs are pretty good, have
a look ::
https://docs.picoreplayer.org/
Jesper.
I was tinking of how to get CamillaDSP running on my PiCorePlayer 🙂
Stig Erik
That would be the same as how to get Camilla to run on a Pi - no? When you have - just get the PiCorePlayer to play whats comes out of Camilla...
//
//
Ohh.... okay...Hi Jesper!
I was tinking of how to get CamillaDSP running on my PiCorePlayer 🙂
Stig Erik
Try to follow my guide here : Link!
Depending on the DAC you use which is the playback device aka' "sound_out", try to adjust the "sound_out" format.
This can be tricky, as it's depending on the DAC hardware!
E.g. i use this for a little Chineese streamer i have
device: "sound_out"
format: S24LE3
There are a lot of options for output setting see here : Link!devices:
samplerate: <<sample_rate>>
chunksize: <<chunk_size>>
queuelimit: 1
capture:
type: File
channels: 2
filename: "/dev/stdin"
format: S32LE
playback:
type: ALSA
channels: 2
device: "sound_out"
format: S32LE
Jesper.
Hey...I really have to do both these some day now - filter switcher and the remote - great work there Jepser!!! 🙂
Will I be able to pull it off for a Mac Mini?
//
Donno about the Mac Mini... The stuff i created is ment for RPI TinyCore Linux (PicorePlayer is based on TinyCore)) only, sry...
Jesper.
I upgraded the repo. https://github.com/Lykkedk/SuperPlayer-v8.0.0---SamplerateChanger-v1.0.0
To now include the newest CamillaDSP v1.0.1
I will update the CamillaGUI soon also .
Jesper.
To now include the newest CamillaDSP v1.0.1
I will update the CamillaGUI soon also .
Jesper.
- Home
- Source & Line
- PC Based
- SuperPlayer - The DSP_Engine (CamillaDSP) samplerate switching & ESP32 remote control