Suitable WG + xover for B&C DCX50

[profiguy]

I really appreciate the offer, but I think that horn will be too narrow up top. I have an expo horn that runs down to 400 and up to about 14k with the DCX50. It doesn't have a diffraction slot, which i like alot. Its about 18" x 10" here in the pictures -

 

[profiguy]

I had a second thought on those horns and reconsidered, so I sent an offer that factors in a higher shipping estimate by ebay, so it works out to the full price after all is said and done.

 

[profiguy]

Those are the actual ones! Where are you located profiguy? $120 apiece plus $35 each shipping…..seems like a good deal to me and seeing as they‘re only a hour away ive almost gotten in the car to go get them a couple times, but you can have them (if you want ill send you the link) seeing as your ready to rock n roll ! 😎

Looks like it works well from 400 up until 8k then goes away quick to 30x30 deg coverage up to 10k then probably down to 20x20 after? but isnt any 2” horn going to do that?

See my msg in your inbox. Thx

 

[Frankx]

Hi Profiguy, it would be really great if you could give me an idea of how the dcx464 and dcx50 sound respectively. I am thinking of buying one of them and your experience would be very helpful. Like you I am interested in using it for Wi-Fi use at home.
I thank you in advance,
Franco

 

[EliGuy]

Just a thread bump. Looking into the DCX50 as well for a 650hz 16" horn. Anyone compared this to the DCX464 or DCX354? Best regards,
_E

 

[EliGuy]

NVM found this, thanks Joseph ! https://josephcrowe.com/blogs/news/b-c-dcx50-coaxial-compression-driver