There are lots of 30A banana plugs.
https://www.newark.com/c/test-measu...t-clips/banana-plugs-jacks?current-rating=30a
And 30A five way binding posts.
https://www.newark.com/superior-electric/bp30r/binding-post-30a-8-32-stud-red/dp/35F3006
https://www.newark.com/c/test-measu...t-clips/banana-plugs-jacks?current-rating=30a
And 30A five way binding posts.
https://www.newark.com/superior-electric/bp30r/binding-post-30a-8-32-stud-red/dp/35F3006
Last edited:
As a pro I'd use Speakons. They connect securely, won't fall out, won't work loose. The cable is terminated with strain relief. Bananas can be inserted backwards, causing phase inversions or short circuits, Speakons are hard to screw up with. I have had a screw loosen inside a Speakon causing a poor connection, but I have had way more screws loosen in dual banana plugs.
Are speakon equals ? Do they follow standards and which ones or should I keep brands parts ?
thanks
I tend to buy Neutrik and they seem like good quality. When it's less than $10 for a 4-pole plug and socket, it seems pointless to try to spend less
Brian
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- speaker connector