😱😱😱
Just courious how many DIY projects can you have at the same time? Most orders are 2 to 5 different enclosures since I post this topic a few days before.
These enclosures are all bought by an Australian.. Guess what will he build with them? 😕
Gee, I would be satisfied with just one project at a time. Totally different league than me that's for sure. 🙁
😱😱😱
Just courious how many DIY projects can you have at the same time? Most orders are 2 to 5 different enclosures since I post this topic a few days before.
These enclosures are all bought by an Australian.. Guess what will he build with them? 😕
Let me see...
my active crossover/preamp
a BA3
a baby aksa
a DAC
Power Supply upgrade /mods of my old amp
New enclosures for my subs
That probably covers everything for now 😉
I'm eyeing off some of the cases for the DAC 🙂
Tony.
2 to 5 projects running at the same time is just about right, I think. 😀
meh, a wussy effort lol, a true problem diyer has more open projects than fingers, now if only i had cases for them all...hmmmm what dimensions are the heatsinks on the big case? i just wonder if i could easily upgrade the heatsinks with conrad. either way i think you'll be getting a similar order from me soon siliconray
2 to 5 projects running at the same time is just about right, I think. 😀
Completion is my problem.

meh, a wussy effort lol, a true problem diyer has more open projects than fingers, now if only i had cases for them all...hmmmm what dimensions are the heatsinks on the big case? i just wonder if i could easily upgrade the heatsinks with conrad. either way i think you'll be getting a similar order from me soon siliconray
heatsink of which model? several has heatsinks
Now I have only 1 tube amplifier DIY porject. But I have other 3 astronomy telescope, 2 radio receiver and several other strange projects. Completion is also my problem.
RE2207, looks so much like RE2205, except the height is 70mm
Outside Dimension:WxHxL = 215x70x228mm (8.46" x 2.76" x 8.94")
Inside Dimension: WxHxL=203.5x62x217mm (8.01" x 2.44" x 8.54")
Material: hard aluminum alloy
thickness: Front 8mm, back 3mm, side 3mm, bottom & top 2mm
finish: brush, hard anodized
net weight: 1.6kg
cutout available for 10pc+ order.
The picture shows an IEC cutout on the rear panel. Do you have them without the cutout?
Thank you.
Anand.
Yes we have them without cutout. please send an email telling our sales that you don't need the cutout, thanks
A nice man think the shipping cost from China to London is too high. So he bought a ticket fly to Beijing to pick up these enclosures by himself. I'm very glad to send these enclosures to him tonight and discuss about his projects😱
Attachments
Last edited:
Im going to tell my girl friend that i didnt really fly all the way to Beijing to see her, Im actually here to collect some nice boxes 😛
Photo looks good 🙂
Photo looks good 🙂
Hi, Ray
The enclosures/cases are really nice. Your are right, the prices are fine but the shipping costs are the killer. Anyway, since you have access to heatsinks of various sizes and there are always people looking for heatsink (me for one), can I suggest you also include heatsinks on your web store for sale?
Lo_tse
The enclosures/cases are really nice. Your are right, the prices are fine but the shipping costs are the killer. Anyway, since you have access to heatsinks of various sizes and there are always people looking for heatsink (me for one), can I suggest you also include heatsinks on your web store for sale?
Lo_tse
Hi Lo_tse
Actually, we are preparing for the heatsinks. But the shipping cost is also a killer because it's cost/weight ratio is very low. Imagine how much it cost for 1kg microcontrollers?
Actually, we are preparing for the heatsinks. But the shipping cost is also a killer because it's cost/weight ratio is very low. Imagine how much it cost for 1kg microcontrollers?
siliconray,
I've made my order!
Please give me the EXACT dimensions of the front panel, rear panel, and bottom panel of the RE2207 enclosure. Thanks!
Anand.
I've made my order!
Please give me the EXACT dimensions of the front panel, rear panel, and bottom panel of the RE2207 enclosure. Thanks!
Anand.
front panel: 215mm x 70mm x 8mm
rear side: 210mm x 68mm
bottom: 220mm x 210mm (not include the thickness of frontpanel)
rear side: 210mm x 68mm
bottom: 220mm x 210mm (not include the thickness of frontpanel)
RE2109,
Outside: 211 x 90 x 257
Inside: 161 x 84 x 246
Heatsink: 250 x 90 x 25
This is ideal for building 10W JLH Class-A Amplifier
Outside: 211 x 90 x 257
Inside: 161 x 84 x 246
Heatsink: 250 x 90 x 25
This is ideal for building 10W JLH Class-A Amplifier
Attachments
Another crazy aluminum enclosure..
RE3222
outside: 316x216x150
inside: 300x200x142
weight: 5kg
finish: sand blaster, hard anodized
no cutouts.
Can be used for high-end tube SE amp, tube headphone amp and mono PP tube block.
Special price $150, plus shipping. $125 for the first 5pcs, for diyaudio member post or PM order only.
RE3222
outside: 316x216x150
inside: 300x200x142
weight: 5kg
finish: sand blaster, hard anodized
no cutouts.
Can be used for high-end tube SE amp, tube headphone amp and mono PP tube block.
Special price $150, plus shipping. $125 for the first 5pcs, for diyaudio member post or PM order only.
Attachments
Beautiful! Now make one that is 1/2 as tall, turn it around 90 degrees, take a picture. This is then an excellent preamp/dac enclosure as well.
Best,
Anand.
Best,
Anand.
More Photos
I'm very disappointed for the photos taken by the engineering guys. Most of the photos above are taken by cell phone🙁
I have been too busy to take photos for these nice enclosures. Today I got some spare time to do this work, here're some of them.
I'm very disappointed for the photos taken by the engineering guys. Most of the photos above are taken by cell phone🙁
I have been too busy to take photos for these nice enclosures. Today I got some spare time to do this work, here're some of them.
Attachments
- Status
- Not open for further replies.
- Home
- More Vendors...
- Siliconray Online Electronics Store
- Some enclosures and chasises we made