Be careful how you say things here Peranders! You may find yourself being sued for damages with remarks like that to a complete newbie! 😉
DIY is a mixed bag.
1.) Those that copy a good established design and obtain success.
2.) Those that can interpret a design and redesign to match their purpose/circumstances.
3.) Those that are eejits that think they can alter things without a basic grounding in arithmetic.
Far too many fall into this last category without ever realising they should be in category 1.
One must be numbers savvy if one is ever going to progress past category 1. There are no exceptions.
1.) Those that copy a good established design and obtain success.
2.) Those that can interpret a design and redesign to match their purpose/circumstances.
3.) Those that are eejits that think they can alter things without a basic grounding in arithmetic.
Far too many fall into this last category without ever realising they should be in category 1.
One must be numbers savvy if one is ever going to progress past category 1. There are no exceptions.
Another funky picture of the SOAP prototype. 🙂
This was tested by a friend on an F4 poweramp and Diy Usher speakers with great result. (Thanx David)
🙂
/JZ
An externally hosted image should be here but it was not working when we last tested it.
This was tested by a friend on an F4 poweramp and Diy Usher speakers with great result. (Thanx David)
🙂
/JZ
nice SOAP boards
Just wanted to express my Joy. 🙂
Had a few boards made for some friends that where interested.
Black and goldplated....
They turned out very nice and since this is my first i,m very happy!. Thanx for all support and for this great forum. 🙂
Just wanted to express my Joy. 🙂
Had a few boards made for some friends that where interested.
Black and goldplated....
They turned out very nice and since this is my first i,m very happy!. Thanx for all support and for this great forum. 🙂
An externally hosted image should be here but it was not working when we last tested it.
Better closeup picture of the PCB.
Goldplated and Black mask is cool 😎
/JZ
Goldplated and Black mask is cool 😎
An externally hosted image should be here but it was not working when we last tested it.
/JZ
A second look
Hint:
Next time you send away your gerber files, use a separate gerber viewer. By that you can much more easily catch errors, like in your case the component print.
I use Viewmate from http://www.pentalogix.com/ freeware.
With a real gerber viewer you can see how the pcb will look like, exactly.
Hint:
Next time you send away your gerber files, use a separate gerber viewer. By that you can much more easily catch errors, like in your case the component print.
I use Viewmate from http://www.pentalogix.com/ freeware.
With a real gerber viewer you can see how the pcb will look like, exactly.
The problems with many pcb cad software is that the pcb doesn't look 100% as you'll see it on the screen.
These boards went like butter in sunshine.. 😎
So i have promised to get another 10 ordered.
I need around 5 more interested in this to order.
/JZ
So i have promised to get another 10 ordered.
I need around 5 more interested in this to order.
/JZ
zei. So that is 10euros per board, inc postage. Can I have 2 boards please
Do you have PayPal? If so send me an email with details to rhpowell(at)webandmail.co.uk
Do you have PayPal? If so send me an email with details to rhpowell(at)webandmail.co.uk
I can vouch highly for these, very impressed with mine and the sound it gives my setup, build price so far including the pcb is about £25, an absoloute bargain and half, still need to get pics of mine up! only about £8 left to spend so cheap as chips.
kanifee. Some pics would be good. I assume that a BOM (list of required parts) is included with the boards.
there ya go, a BOM is certainly included along with the silkscreen and schimatics, i must admit that i got quite a bit of help on questions i had so really the build couldn't have gone any smoother. One thing to note is i used a bridge rectifier with mine as i couldn't source 4x mur680 diodes