Heya guys,
Well ive been reading for the last few weeks on the posts on the forum. Some of you guys are so knowledgeable. But thought i might get some hands on action (on a very limited budget) so im in the process of making a 1.8inch LCD projector from a 1.8 inch LCD TV and a old slide projector. Im from Australia (Perth) so some of the parts you come by in the States are a lot harder to find around here. But im doing a step by step guide on what im doing, so that others can follow. And also placing where to get the parts in Australia. But anyway thanks all of you for the ideas and check out www.diylcd.tk for the walkthrough guide (just saves me writing it up more than once) hope this isnt against the rules.. apologies in advance if it is. Hope to see some of the fellow Aussies! 😛
Steve
Well ive been reading for the last few weeks on the posts on the forum. Some of you guys are so knowledgeable. But thought i might get some hands on action (on a very limited budget) so im in the process of making a 1.8inch LCD projector from a 1.8 inch LCD TV and a old slide projector. Im from Australia (Perth) so some of the parts you come by in the States are a lot harder to find around here. But im doing a step by step guide on what im doing, so that others can follow. And also placing where to get the parts in Australia. But anyway thanks all of you for the ideas and check out www.diylcd.tk for the walkthrough guide (just saves me writing it up more than once) hope this isnt against the rules.. apologies in advance if it is. Hope to see some of the fellow Aussies! 😛
Steve
What's the resolution of the LCD? looks a bit low, but hey, cool and compact DIY pj. Any idea on what's the lumen output for the bulb in the slide projector?
Cheers, I could really tell you the resolution as the instruction manual doesnt suggest it. Yes it is low but hey i only paid $20US for it. All you would have to do is have a higher res LCD. About the lumens i bought it second hand so it came with no instruction manual and i havent looked on the net. But the model is: Reflecta Diamator A Slide Projector, try googling it and seeing what you come up with..
hi!
I am i Doctor too.
your lamp is not better.it is 3500k
my lamp is good for you,it is 7500k
http://www.diyaudio.com/forums/showthread.php?s=&threadid=59091&perpage=10&pagenumber=31
I am i Doctor too.
your lamp is not better.it is 3500k
my lamp is good for you,it is 7500k
http://www.diyaudio.com/forums/showthread.php?s=&threadid=59091&perpage=10&pagenumber=31
ywh, when u state 3500k is that lumens or the temp that it is burning at? i had a look at you pictures and indeed they are bright. but u would of paid a lot more for you lamp?? have to weigh up costs...
btw my site has been over its allocated bandwith so im off to find another server and hopefully it will be up again soon...if anyone knows of any free servers with more bandwith leave us a post...
cheers
btw my site has been over its allocated bandwith so im off to find another server and hopefully it will be up again soon...if anyone knows of any free servers with more bandwith leave us a post...
cheers
yhw though how much did u pay for that lamp??
also, well my site was hit with over 5000 hits in two days so it ran out of bandwith very quickly. Apologies to all that have tried to get to it and received the "frozen" site. But its all good now im up and running...with some very generous donations by a few...so check it out its got more info then i have given here..
also, well my site was hit with over 5000 hits in two days so it ran out of bandwith very quickly. Apologies to all that have tried to get to it and received the "frozen" site. But its all good now im up and running...with some very generous donations by a few...so check it out its got more info then i have given here..
- Status
- Not open for further replies.