Signal relay

Status
Not open for further replies.
Jump to Latest
#8
At work we mostly use Axicom, Omron and Zettler (and some others). Only Omron has given us some quality issues over the years (actually enough for a customer to do a redesign).

For your application I'd recommend you check out the Axicom V23105 series, but any good quality relay should be suitable.
 
#9
jitter said:
At work we mostly use Axicom, Omron and Zettler (and some others). Only Omron has given us some quality issues over the years (actually enough for a customer to do a redesign).

For your application I'd recommend you check out the Axicom V23105 series, but any good quality relay should be suitable.
Click to expand...

Ok.
On another subject, I need to find a toggle switch that won't pop when switching. I wire a mid pot bypass that works well except for the pop.
 
#11
the pop when switching is probably not the switches fault. you might find that there is some DC coming in somewhere and the change in DC level is what's causing the pop. could be other causes too, hard to say without details of your circuit. can you put a scope on it?

-Joel
 
Status
Not open for further replies.
Top Bottom