Yes it can , use the wifi/bt USB inputHi,
Does this mean no USB drive can be connected with a USB DAC connected at the same time? That's a bummer.
Just registered as I'm very interested in the USbridge Sig + Shanti in alu case (so have to wait a bit longer).
It will feed a Kii Control (part of Kii BXT System) using USB, could also use coax but don't see the benefit in that.
I'll be playing music from NAS or Spotify -> but it's unclear what OS I should select? Has to be wife friendly. Today I have a minipc (atom) with Daphile and with spotify connect it's easy enough.
It will feed a Kii Control (part of Kii BXT System) using USB, could also use coax but don't see the benefit in that.
I'll be playing music from NAS or Spotify -> but it's unclear what OS I should select? Has to be wife friendly. Today I have a minipc (atom) with Daphile and with spotify connect it's easy enough.
Hello,
Just got the Shanti and it’s improved the sound of the Digione sig.
I’m debating taking it apart and putting it and the digione into a single enclosure.
Are there obvious power in points on the digione so I can hard wire them together?
I noticed you also have the usb sig and it looks like there are power in points on that. If I get the usb sig, put the digione sig on top of that and get rid of my pi, will I still need both power outs of the Shanti?
Thanks
mdr
Just got the Shanti and it’s improved the sound of the Digione sig.
I’m debating taking it apart and putting it and the digione into a single enclosure.
Are there obvious power in points on the digione so I can hard wire them together?
I noticed you also have the usb sig and it looks like there are power in points on that. If I get the usb sig, put the digione sig on top of that and get rid of my pi, will I still need both power outs of the Shanti?
Thanks
mdr
Last edited:
Can use with digi one 40pin over USB bridges ?
Anything that works on RPI will work on USBridge Sig (RPI connector)
So..yes.
WIFI dongle we will have a new one in about 1 week. BT dongle I dont have a date yet
Anything that works on RPI will work on USBridge Sig (RPI connector)
So..yes.
WIFI dongle we will have a new one in about 1 week. BT dongle I dont have a date yet
Thanks! I'll have to wait for case and Wi-Fi dongle.
Hi
Digione Sig needs 2 powers. "Dirty side" can be taken from USBridge DC input and clean side has to be feed independently
So yes you need 2 PSUs. You could tie them up together but we do not recommend .
Katwax , I would recommend Moode
What about the power in on the DigiOne sig, I'd like to hardwire the PS.
Thanks!
Hi
Katwax , I would recommend Moode
Ok thanks. No I wait for the bundle to be put online
- Home
- Vendor's Bazaar
- Shanti Dual LPS 5V/3A , 5V/1.5A