Have in front of me a shanling scd-t200c.
Appears to be a power supply fault, no display and no transport action at all.
Tubes and two blue led's on the front (cd/sacd) glow.
Would really love the diagram of the power supply.
Or some voltage readings on the connectors for the supply section.
That is unless someone has knowledge of what may be wrong.
Save me the time of testing each and all reg.....
Appears to be a power supply fault, no display and no transport action at all.
Tubes and two blue led's on the front (cd/sacd) glow.
Would really love the diagram of the power supply.
Or some voltage readings on the connectors for the supply section.
That is unless someone has knowledge of what may be wrong.
Save me the time of testing each and all reg.....
Same problem here -
I have the schematics though it may take me a day or two to locate and scan.
My Shanling sc cd200 was fine until last night. When I powered it up, two blue lights - no readout. Plays music but, something is amiss.
I have the schematics though it may take me a day or two to locate and scan.
My Shanling sc cd200 was fine until last night. When I powered it up, two blue lights - no readout. Plays music but, something is amiss.
Almost exactly what this one is doing.
Same fault except this one has no transport action at all.
It ain't the power supply.
I have managed to find out though how to fix it.
Take it back to an authorised dealer for a wrnty board swap.
The controller board in the seperated sheilded section is known to have issues.
Shanling are swapping them under wrnty.
I would still love a copy of the service manual/schematic though.
Thanks.........
Let me know when ready to email it, I'll sent up a temp account to receive it.
Same fault except this one has no transport action at all.
It ain't the power supply.
I have managed to find out though how to fix it.
Take it back to an authorised dealer for a wrnty board swap.
The controller board in the seperated sheilded section is known to have issues.
Shanling are swapping them under wrnty.
I would still love a copy of the service manual/schematic though.
Thanks.........
Let me know when ready to email it, I'll sent up a temp account to receive it.
did you manage to find the schematics for the shanling scd-t200c ?? could you please forward a copy to me if you did - thank you very much - Nige
I have some diagrams on paper, could scan them tomorrow. I have problems with the transport circuit board, bad connectors it seems. Are these boards available somewhere?
yes please
Oh yes please - if you could send them to dewisant123@gmail.com would be great - thank you very much - Nige
Oh yes please - if you could send them to dewisant123@gmail.com would be great - thank you very much - Nige
please,
I might to receive a copy of the schematic, I would change my scd-t200c.
Thank you very much.
my mail mauceri_@hotmail.com
I might to receive a copy of the schematic, I would change my scd-t200c.
Thank you very much.
my mail mauceri_@hotmail.com
Are Vickers hifi the only importer of shanling in England?
Got my player to spin up and play a whole cd on saturday but on sunday it were back to non functional 🙁
Got my player to spin up and play a whole cd on saturday but on sunday it were back to non functional 🙁
Vickers hifi very likely that the problem is in the flat cable of the laser, in my SCD-T200C I had to replace it and then reads everything. 😛
Look at this ...
AWM 20798 RIBBON FLEX CABLE same side 0.50 mm pitch 26 PIN 150mm 26PIN 15cm | eBay
Does this fix the " intermittent no display no function blues lights ok " problem ? or is that fault due to the aforementioned controller board.
Had this problem for some time now and couldn't get any information, hope someone can help.
Hi, i have a problem with my SCD-T200C. The display shows only "POWNR 0".
It would be very great, if somebody can send me the circuit-diagram to fabian-wunderlich@gmx.net
Thanks
It would be very great, if somebody can send me the circuit-diagram to fabian-wunderlich@gmx.net
Thanks
Are any had receive diagram for T-200C! Have the same problem:" intermittent no display no function two blue lights ok " Needs any help,experience, diagrams. As I see through this discussion, it is most common problem for Shanling
Thanks, Olek
Thanks, Olek
It seems, that problem was in SACD controller board. Had contact with Shanling and they inform me that: "The essential ICs on the SACD pcb. has no more production and sorry that we can not sell you the controller board" .
May be there will be any ideas how to fix!
May be there will be any ideas how to fix!
Hi,
I'm from Brazil.
II have a problem with my SCD-T200C.
Does not work.
It would be very great, if somebody can send me the circuit-diagram to
marcusbraga@msn.com
marcusbraga.braga@gmail.com
Thanks
I'm from Brazil.
II have a problem with my SCD-T200C.
Does not work.
It would be very great, if somebody can send me the circuit-diagram to
marcusbraga@msn.com
marcusbraga.braga@gmail.com
Thanks
Please help me!
My Shanling cd player ScdT200c is deffective and is not working. I would appreciate if someone could help to find the service manual or the circuit diagram in order to help me to repair it.
My Shanling cd player ScdT200c is deffective and is not working. I would appreciate if someone could help to find the service manual or the circuit diagram in order to help me to repair it.
My Shanling SCD-T200 do not read hybrid and multichanel SACD discs. Read only CD and old stereo SACD. Please help with service manual or circuit diagram. edvardas66@gmail.com