Seas Thor Crossover help

Hello,

I have inherited a pair of speakers: seas thor kit in Planet 10 quarterwave transmission line cabinets which are 49.5 x 9 x 13 inches. These belonged to two great men in my audio club and now I have inherited them. I believe they have the original crossover or something else that does not work. The speakers produce phenomenal (overpowering) deep bass and and a very forward midrange and treble that is highly detailed and fatiguing. I am looking for a crossover schematic that will suit this speaker without throwing out all the great bass and detail. I am happy to splurge on high quality components for the crossover as the drivers are excellent.
My friend that had these speakers said that this forum has had several different clever people work on this before and I am hoping that I can refine these beauties with help from the DIY community.

Regards

Rhett
 

Attachments

  • IMG_1105.jpg
    IMG_1105.jpg
    119.3 KB · Views: 379
  • IMG_1106.jpg
    IMG_1106.jpg
    99.5 KB · Views: 311
There's a revised filter in the main Thor thread here which many consider to be an improvement over the original. I believe this is the redesign, as drawn up by Dave. Not sure if there have been any further changes since then, but if so they're unlikely to be vast.
 

Attachments

  • SEAS-MTM-newXO.gif
    SEAS-MTM-newXO.gif
    19 KB · Views: 541
Hi,

Planet 10 has made a pdf where different cabinets and crossovers are shown (Thor-Revisited.pdf). Based on the cabinet dimensions you seem to have the "SMALL THOR ML-TL". However, the paper does not include Jimangie's latest crossover from 2015 (see attachment 2).
 

Attachments

Years ago I heard a pair that sounded good…I think the owner brought the crossover frequency down to about 1800hz with a larger first woofer inductor and removing the resistor from peak/break-up attenuation leg(?). Reminds me of the crossover Jeff Bagby used on his Parts Express “TANGO” kit.