Please recommend some screws that I can use for 4 pin XLR Neutrik connector. https://uk.farnell.com/neutrik/nc4fd-lx-b/socket-xlr-black-4pole/dp/1390122
Ideally something like this:
Ideally something like this:
If you are fixing into an aluminium or steel chassis, https://uk.rs-online.com/web/c/fast...ews/?applied-dimensions=4294475694,4294474738
Remember to get the special driver bit for those if you use them. They are tamper proof which needs a bit that has the center hole to be used.
I much prefer the behind panel version: NC4FBH or NC4FBH-B for black. Much cleaner looking. I use M3 screws and run a tap thru the ears. Countersink if you want to go to the trouble (I did). These are set up for M2.5 fasteners, but those are difficult to come by in the US. M3 works just fine.
Actually the NC4FBH is designed for use with the Neutrik screws. P/N A-SCREW-1-8 from Neutrik. Mouser P/N: 568-A-SCREW-1-8.
Tom
Tom
