• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Salas low shunt Group-design by Salas

Status
Not open for further replies.
Jump to Latest
#504
Cool. 😛
I was thinking of getting some SilmicIIs from PartsConnexion, but since I won't be getting anything else, I might as well skip it and stick with Pana FM.

What's the recommendation for R1? (Wattage/type)
C1-C4 should be ceramic?
 
Last edited:
#505
The only thing that has merit, is if a reg is destined to serve one application, after finding the correct voltage with the trimmer, turn it off, measure the trimmer, and substitute a same or nearest value low ppm 1W resistor. I like the FM better than Silmic even on cathode bypass in some occasions by the way. But its also a system thing. R1 wirewound 2-5W. Depends on your current. Avoid ceramics for snubber caps. Film.
 
#507
1.sureshm
2. wendell c
3. barrows
4. Ryssen
5. qusp
6. stoolpigeon
7. joemana
8. AndrewT
9. Carrier Bag Man
10. luvdunhill
11. jonners
12. Nikon1975
13. noSmoking
14. awpagan
15. VT67
16. bearbear
17. marcus1
18. drazen
19. Jaap
20. Ferrari
21. Russellc
22. Underwater
23. samoloko
24. Westley
25. number9
26. Androokie
27. Ciu
28. mace1337
29. bracla
30. tassosk
31. AR2
32. JimT
33. Kerux
34. prooptiki
35. suburra
36. guglielmope
37. Jogi
38. pengboon
39. frozen wing
40. h-wan
41. korben69
42. ppcblaster
43. merlin el mago
44. daanve
45. barmanekm

I got mine about two weeks ago. Thx.
 
#510
barmanekm said:
1.sureshm
2. wendell c
3. barrows
4. Ryssen
5. qusp
6. stoolpigeon
7. joemana
8. AndrewT
9. Carrier Bag Man
10. luvdunhill
11. jonners
12. Nikon1975
13. noSmoking
14. awpagan
15. VT67
16. bearbear
17. marcus1
18. drazen
19. Jaap
20. Ferrari
21. Russellc
22. Underwater
23. samoloko
24. Westley
25. number9
26. Androokie
27. Ciu
28. mace1337
29. bracla
30. tassosk
31. AR2
32. JimT
33. Kerux
34. prooptiki
35. suburra
36. guglielmope
37. Jogi
38. pengboon
39. frozen wing
40. h-wan
41. korben69
42. ppcblaster
43. merlin el mago
44. daanve
45. TheShaman
46. barmanekm

I got mine about two weeks ago. Thx.
Click to expand...

Fixed.
 
#511
1.sureshm
2. wendell c
3. barrows
4. Ryssen
5. qusp
6. stoolpigeon
7. joemana
8. AndrewT
9. Carrier Bag Man
10. luvdunhill
11. jonners
12. Nikon1975
13. noSmoking
14. awpagan
15. VT67
16. bearbear
17. marcus1
18. drazen
19. Jaap
20. Ferrari
21. Russellc
22. Underwater
23. samoloko
24. Westley
25. number9
26. Androokie
27. Ciu
28. mace1337
29. bracla
30. tassosk
31. AR2
32. JimT
33. Kerux
34. prooptiki
35. suburra
36. guglielmope
37. Jogi
38. pengboon
39. frozen wing
40. h-wan
41. korben69
42. ppcblaster
43. merlin el mago
44. daanve
45. barmanekm
46. clavefremen

I got mine last weeks.
 
#512
ClaveFremen said:
1.sureshm
2. wendell c
3. barrows
4. Ryssen
5. qusp
6. stoolpigeon
7. joemana
8. AndrewT
9. Carrier Bag Man
10. luvdunhill
11. jonners
12. Nikon1975
13. noSmoking
14. awpagan
15. VT67
16. bearbear
17. marcus1
18. drazen
19. Jaap
20. Ferrari
21. Russellc
22. Underwater
23. samoloko
24. Westley
25. number9
26. Androokie
27. Ciu
28. mace1337
29. bracla
30. tassosk
31. AR2
32. JimT
33. Kerux
34. prooptiki
35. suburra
36. guglielmope
37. Jogi
38. pengboon
39. frozen wing
40. h-wan
41. korben69
42. ppcblaster
43. merlin el mago
44. daanve
45. TheShaman
46. barmanekm
47. clavefremen

I got mine last weeks.
Click to expand...

Fixed.

/sigh
 
#513
I believe that I have waited long enough and that I am the last. I am sad to report that i still have not received my boards and unfortunately I ordered 10 sets. I have asked Quanghao in a private email and not received a response so I am now asking here in the open.

1. Could you please confirm the shipping address you used when sending out the boards to me?

2. Is there any reporting to your mail carrier that can be done to begin a trace on the package?

3. If there is a second run could my order be filled from that?

4. Can I please get the files to make my own boards?

Lastly a thought for all who participated.
I realize that shipping problems are not your responsibility, but in the group interest of pooling resources to save it seems that shipping losses might be shared, sort of a group insurance. Just as it seems unfair for Quanghao to make good on the loss since there is no profit it seems unfair for me to have paid and received nothing. As this could potentially happen to any of us we might as a community consider how we can help each other out in this regard.

Thanks for listening.
 
#514
1.sureshm
2. wendell c
3. barrows
4. Ryssen
5. qusp
6. stoolpigeon
7. joemana
8. AndrewT
9. Carrier Bag Man
10. luvdunhill
11. jonners
12. Nikon1975
13. noSmoking
14. awpagan
15. VT67
16. bearbear
17. marcus1
18. drazen
19. Jaap
20. Ferrari
21. Russellc
22. Underwater
23. samoloko
24. Westley
25. number9
26. Androokie
27. Ciu
28. mace1337
29. bracla
30. tassosk
31. AR2
32. JimT
33. Kerux
34. prooptiki
35. suburra
36. guglielmope
37. Jogi
38. pengboon
39. frozen wing
40. h-wan
41. korben69
42. ppcblaster
43. merlin el mago
44. daanve
45. barmanekm
46. clavefremen
47. gorko1

I got mine.
 
#515
Hello Quanghao,

I too have been waiting for boards. You shipped only one board originally, not the four I ordered and paid for. You quickly acknowledged the mistake and said you would send the remaining three. The balance of the three remaining promised on November 17 have not yet arrived.

I post this here only to request an update on shipping and to let you know directly that they have not yet arrived so as not to be forgotten.

I appreciate the work in layout and the additional effort for group buys. I look forward to the remainder of the PCBs.

Best regards,
Dave
 
#516
1.sureshm
2. wendell c
3. barrows
4. Ryssen
5. qusp
6. stoolpigeon
7. joemana
8. AndrewT
9. Carrier Bag Man
10. luvdunhill
11. jonners
12. Nikon1975
13. noSmoking
14. awpagan
15. VT67
16. bearbear
17. marcus1
18. drazen
19. Jaap
20. Ferrari
21. Russellc
22. Underwater
23. samoloko
24. Westley
25. number9
26. Androokie
27. Ciu
28. mace1337
29. bracla
30. tassosk
31. AR2
32. JimT
33. Kerux
34. prooptiki
35. suburra
36. guglielmope
37. Jogi
38. pengboon
39. frozen wing
40. h-wan
41. korben69
42. ppcblaster
43. merlin el mago
44. daanve
45. barmanekm
46. clavefremen
47. gorko1
48. brickj
 
#518
fitzfish said:
Hello Quanghao,

I too have been waiting for boards. You shipped only one board originally, not the four I ordered and paid for. You quickly acknowledged the mistake and said you would send the remaining three. The balance of the three remaining promised on November 17 have not yet arrived.

I post this here only to request an update on shipping and to let you know directly that they have not yet arrived so as not to be forgotten.

I appreciate the work in layout and the additional effort for group buys. I look forward to the remainder of the PCBs.

Best regards,
Dave
Click to expand...



I have worse luck than you, my boards never arrives 🙁

Cheers
 
#519
stephen1212 said:
I believe that I have waited long enough and that I am the last. I am sad to report that i still have not received my boards and unfortunately I ordered 10 sets. I have asked Quanghao in a private email and not received a response so I am now asking here in the open.

1. Could you please confirm the shipping address you used when sending out the boards to me?

2. Is there any reporting to your mail carrier that can be done to begin a trace on the package?

3. If there is a second run could my order be filled from that?

4. Can I please get the files to make my own boards?

Lastly a thought for all who participated.
I realize that shipping problems are not your responsibility, but in the group interest of pooling resources to save it seems that shipping losses might be shared, sort of a group insurance. Just as it seems unfair for Quanghao to make good on the loss since there is no profit it seems unfair for me to have paid and received nothing. As this could potentially happen to any of us we might as a community consider how we can help each other out in this regard.

Thanks for listening.
Click to expand...

+1
 
Status
Not open for further replies.
Top Bottom