• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Salas L Adapter circuit on Raspberry Pi footprint Board

I made some Salas L adapter circuits on placed them on a raspberry pi board outline for my music servers that run Moode Audio. I have made some new ones with a changed component footprint positioning to better suit the other boards in my stack, So the old ones are for sale if anyone is interested. I will list them as I swap out my old ones.
The 2 white connectors supply 5VDC. one has a ptc fuse on it. My Pi running Moode only drew about 500mA. If you were drawing more you might need a bigger heatsink. It was supplied by 9v dc by an old linear wall pack. It has a toggle switch on the 9v input for off and on.
 

Attachments

  • 1.jpg
    1.jpg
    164.2 KB · Views: 282
  • 2.jpg
    2.jpg
    197.8 KB · Views: 258
  • 3.jpg
    3.jpg
    203.8 KB · Views: 221
  • 4.jpg
    4.jpg
    166 KB · Views: 262
Thanks. On that one I first powered the Pi by running 2 connections from under the board where the 5v jack was to the IO to power the pi. I fitted the jack on top of the board later. My other ones power the PI through a header mounted on the board but that is a different layout. As you would know if you power the pi through the IO you dont have some of the protection. I will post some pics later.