RS28F-4 Tweeter xo sim help?

[ODougbo]

Pics are simple enough - click
Go Advanced
Go to paper clip icon
Browse file
Upload file
Close this window

 

[richard t]

Thanks,
I was using the quick reply only.
Hope this worked

 

[ODougbo]

I think this is what you have........ The woofer inductor must be bigger than .5 😱

The white pair - sounded great last night, must be pretty close to flat; need to check xo point and check for overlap. The 750watts is cool; these 16ohm speakers seem to gobble up power and want more

Wish I could measure like some of the DIY guys (very professional results). MTM's are way harder than 2-ways to find xo by ear and using push button switches.

View attachment 360236

Thanks,
I was using the quick reply only.
Hope this worked

 

[richard t]

Nope. It's a .5 but it is 14 guage

 

[ODougbo]

Did you happen to see the 2nd review here?
Dayton Audio RS28A-4 1-1/8" Aluminum Dome Tweeter 275-130#

btw, I remember reading that this tweeter needs a zobel circuit to compensate for the impendence rise. (apologetic - not versed in xo language) Which I did hear before adding one.

 

[richard t]

That one is the Aluminum version. I did read somewhere that they use a zobel on it. I also saw that the F can be crossed that low too. My crossover was from a design that I had so I just followed the instructions. I may play around with it someday but I'm very happy with how it sounds.

 

[ODougbo]

The best out of 5

Yes, agreed it's a heck of a tweeter (I have the F version), hearing more detail at the top end of the listening range.

New Pic - and really liking these 😀

 

[richard t]

Nice work. You should be liking them.